Reeder Custom Guns - Isn't the new .321 GNR a ".308-.357"?

WB
Isn't the new .321 GNR a ".308-.357"?
Saturday, July 28, 2018, 16:36

By measurement the .300 GNR is a .401 Herters necked to .308, or .30-30 based .30 Herrett "short" cylinder length. Over a .357 based version the .300 GNR has super thick and strong brass with an ample hefty rim. They last tons of loads and are almost indestructible.

Gary's .357 version is a little bit easier to make by simple FL re-sizing/necking operations. The .300 GNR requires a .30-30 to be run through an extra form die and cut off. Not a big deal but an extra step. I actually enjoy the operation.

30-357 - Derek, 2018-07-28, 08:54
- you are asking about a cartridge that already exists - Gary Reeder, 2018-07-28, 23:11
- in a revolver the 300 GNR with a 110 grain bullet will do - Gary Reeder, 2018-07-28, 09:46
  - Isn't the new .321 GNR a ".308-.357"? - WB, 2018-07-28, 16:36
    - 30-357 - Derek, 2018-07-28, 19:22
      - the difference is about 20 years and almost 1000 fps - Gary Reeder, 2018-07-28, 21:42
        321 - Derek, 2018-07-29, 05:11
      - The capacity of the .300 GNR is a little over 20+ gr. - WB, 2018-07-28, 19:49