Reeder Custom Guns - it would have to be longer but then your 32 H&R would not

Gary Reeder
it would have to be longer but then your 32 H&R would not
Thursday, August 02, 2018, 13:56

fit. The cylinder window of the Single Six would have to be wider for the longer 327, so we would have to take the barrel out, trim off the rear of the barrel and then put it back in and adjust the barrel/cylinder gap down to .002 to allow the longer cylinder to be fit in there.

Can the cylinders of a Single Six in - O’ Gary, 2018-08-02, 04:55
- single 6 - Frank Simon, 2018-08-02, 13:52
  - it would have to be longer but then your 32 H&R would not - Gary Reeder, 2018-08-02, 13:56
- Huey is right. Normally the 32 H&R cylinders are too - Gary Reeder, 2018-08-02, 10:21
- Cylinder usually pretty short for the 327 COAL... (nm) - Huey, 2018-08-02, 08:17
  - Huey is Correct. Why bother, just load - Fermin Garza, 2018-08-02, 21:23
    - Gary and his crew have built me Trail Guns in... - Huey, 2018-08-03, 01:15