Reeder Custom Guns - I use Hornady Cam-lock puller

Tom S
I use Hornady Cam-lock puller
Monday, August 20, 2018, 09:49

I used to use the inertia puller with newsprint squished in the Bottom to prevent bullet nose damage. It worked fine. I still use it for one off pulls. For big pulling jobs like yours of 200 cartridges, pounding hundreds of times will suck. I now use the Hornady Cam Lock puller. It would be much faster. You can adjust the tension on the collet so it does not mar your bullets. Even if a tiny mark I have not found it to be detrimental to accuracy. Does not take long to setup and adjust.. you will need the puller and correct collet for your diameter bullet. It is about $25 for the puller and $8 for Collet pullers. I find it works very well.

Bullet Pullers - Robt, 2018-08-19, 21:19
- I have a set of these, - Abin Sur, 2018-08-20, 15:09
- I use Hornady Cam-lock puller - Tom S, 2018-08-20, 09:49
  - I second the Hornady puller. Works great (nm) - Mark Wilson, 2018-08-20, 10:46
    - I third the Hornady puller (nm) - Randy Barnett, 2018-08-20, 13:54
    - I am very partial to Hornady products but the bullet puller - Gary Reeder, 2018-08-20, 11:20
      - I have a couple of rounds to pull, so I will try - Gary Reeder, 2018-08-20, 19:21
  - Bullet Puller - Robt, 2018-08-20, 10:37
- I have pulled many belted magnum rounds with the RCBS - Gary Reeder, 2018-08-19, 21:46
  - I use a ear plug to cushion bullet (nm) - Shane B, 2018-08-20, 09:20