was a 6 shot. He started playing with the Ruger Buckeye and found they needed a proper throat, (the production being a bit small) and a proper cylinder gap. The chambers were pretty right, but has his reamers ground with tight specs when he started making his own.
The original Buckeye's if properly massaged with proper throats and cylinder gap, will handle the same loads that John's guns run. I have a couple guy's I've shot with, one had one of John's guns and one with a John massaged Buckeye. They both shot the same load. 200's at 1700+ from a 5.5" and 6.5" barrels. One of the above fellows had a 10" Contender barrel in 38WCF and a throat for the modern FN/LBT style bullets. That same load went over 2000 fps from the 10" Contender.
That was quite surprising! The 38 WCF is an unexpected horse. Makes me want one!
-
I'm dead set on a nice 38-40 Revolver...
- Huey, 2018-10-12, 15:36
-
38-40
- Shawn D, 2018-10-12, 21:37
-
? 4 Gary. 38-40 to 401 GNR
- Shawn D, 2018-10-12, 22:18
- no, the 38-40 case is already bigger than the 44 mag case - Gary Reeder, 2018-10-14, 17:42
-
Post a link to thst. Not Gary, but the 38-40 is bigger..
- Huey, 2018-10-13, 02:39
-
The .44-40 and .38-40 are close to .45 Colt size
- WB, 2018-10-13, 07:10
-
The same is true of the 45 Colt and 45-70 loads...
- Huey, 2018-10-13, 07:28
-
If I croak prematurely promise me
- WB, 2018-10-13, 09:07
- when you croak, all your reloading gear and - Gary Reeder, 2018-10-14, 17:45
-
If I croak prematurely promise me
- WB, 2018-10-13, 09:07
-
The same is true of the 45 Colt and 45-70 loads...
- Huey, 2018-10-13, 07:28
-
The .44-40 and .38-40 are close to .45 Colt size
- WB, 2018-10-13, 07:10
-
? 4 Gary. 38-40 to 401 GNR
- Shawn D, 2018-10-12, 22:18
-
If you chose 5-shot the other cyl. are of no use
- WB, 2018-10-12, 16:45
-
I'm leaning towards rechambering cylinders...
- Huey, 2018-10-12, 16:53
-
The 38 WCF
- Abin Sur, 2018-10-12, 17:07
-
I do believe a six shot would be best, but...
- Huey, 2018-10-12, 17:17
-
.400 cartridges
- Alcorn, 2018-10-12, 17:38
-
The 38 WCF does have very thin
- Abin Sur, 2018-10-13, 05:55
-
.38-40
- Ronnie, 2018-10-13, 06:56
-
John Linebaugh's 38WCF
- Abin Sur, 2018-10-13, 16:32
-
Interesting - ? for Gary.
- Shawn D., 2018-10-14, 13:43
-
you asked about what loads. What revolvers are you
- Gary Reeder, 2018-10-14, 17:36
-
Revolvers
- Shawn D, 2018-10-14, 21:01
- Shawn, that was John Linebaugh they were talking about, not - Gary Reeder, 2018-10-14, 21:10
-
Revolvers
- Shawn D, 2018-10-14, 21:01
-
you asked about what loads. What revolvers are you
- Gary Reeder, 2018-10-14, 17:36
-
I may be out of line here and if so I apologize, but I have
- Tommy Pedigo, 2018-10-13, 19:33
-
??
- Abin Sur, 2018-10-13, 20:18
- Abin and Tommy. I am proud to call both of you friends - Gary Reeder, 2018-10-13, 21:58
-
??
- Abin Sur, 2018-10-13, 20:18
-
Interesting - ? for Gary.
- Shawn D., 2018-10-14, 13:43
-
Leaning in that same direction... (nm)
- Huey, 2018-10-13, 07:22
- Only choice is which barrel (nm) - Ronnie, 2018-10-13, 12:55
-
John Linebaugh's 38WCF
- Abin Sur, 2018-10-13, 16:32
-
.38-40
- Ronnie, 2018-10-13, 06:56
-
The 38 WCF does have very thin
- Abin Sur, 2018-10-13, 05:55
-
.400 cartridges
- Alcorn, 2018-10-12, 17:38
-
I do believe a six shot would be best, but...
- Huey, 2018-10-12, 17:17
-
The 38 WCF
- Abin Sur, 2018-10-12, 17:07
-
I'm leaning towards rechambering cylinders...
- Huey, 2018-10-12, 16:53
-
38-40
- Shawn D, 2018-10-12, 21:37