I cast about 1500 bullets ... 43 pounds of them. Got about 400 rounds loaded today.
The 44 Keith bullet
![[image]](images/uploaded/201810200028025bca769211064.jpg)
Ran across my old Long-Range 45 Colt bullet. Used in the Ruger Blackhawk. It is the old Lyman 457191 300 gr. 45-90 rifle bullet. Sized down to .452" and crimped into the top grease groove. I normally loaded these around 1100 fps. Shot quite a bit of game with it. Extremely accurate at long range. John Taffin was with me when I shot some through the front wall of an old cabin better than a quarter mile away,
![[image]](images/uploaded/201810200034125bca780489b72.jpg)
Some of my experimental 30-30 loads using the 125 gr. Speer AK47 bullet. Still testing these. Single load them in the Model 94 Trapper.
![[image]](images/uploaded/201810200035535bca7869868ba.jpg)
-
Stuff From Today
- Jim Taylor, 2018-10-19, 17:36
-
I WELL REMEMBER THAT DAY. I WAS
- JT, 2018-10-20, 08:11
-
Most everything went through the front wall
- Jim Taylor, 2018-10-20, 08:29
-
AND I REMEMBER ONE HIT THE OLD BEDSTEAD
- JT, 2018-10-20, 10:20
- Yep. It was one of my 300 gr. 45's. (nm) - Jim Taylor, 2018-10-20, 14:33
-
AND I REMEMBER ONE HIT THE OLD BEDSTEAD
- JT, 2018-10-20, 10:20
-
Most everything went through the front wall
- Jim Taylor, 2018-10-20, 08:29
- Since i size one at a time, as well as charger and seat - Lynn, 2018-10-20, 07:25
-
I enjoy casting bullets (when I have the time) but
- Gary Reeder, 2018-10-19, 17:40
-
Sizing & Lubing
- Robt, 2018-10-19, 22:55
-
Use a Star Resizer for an easier job
- Harry, 2018-10-20, 05:19
- I use the time sizing and lubing to meditate - Jim Taylor, 2018-10-20, 06:08
-
Use a Star Resizer for an easier job
- Harry, 2018-10-20, 05:19
-
Sizing & Lubing
- Robt, 2018-10-19, 22:55
-
I WELL REMEMBER THAT DAY. I WAS
- JT, 2018-10-20, 08:11