510 GNR brass
Ron Orbeck
[subject]
Monday, December 10, 2018, 01:07 (2826 days ago)
Any one have 510 GNR brass about 100 cases I could buy. Or anyone know of any available any where?
It can very easily be made from .500 Linebaugh too
WB
[subject]
Monday, December 10, 2018, 05:56 (2826 days ago) @ Ron Orbeck
by shortening slightly. Probably the easiest method. I've made them from varied cases; .50 AK, .348 Win. etc. when those cases split or had a problem.
Maybe someone has a stash to let go.
we have plenty of 500 Linebaugh brass and we
Gary Reeder
[subject]
Monday, December 10, 2018, 12:13 (2826 days ago) @ WB
have the 510 GNR trim die. This trims the 500 Linebaugh brass down to 510 GNR length in your press. They are $20.
500L is available from a couple different
MTM
[subject]
Monday, December 10, 2018, 06:42 (2826 days ago) @ Ron Orbeck
Manufacturers and is easy to trim to .510 length. It just won’t have the proper headstamped on the brass. What is your contact info?
Gary has a trim die to use 500LB.
IC
[subject]
Monday, December 10, 2018, 07:51 (2826 days ago) @ Ron Orbeck
- No text -
I bought some 50 Alaskan
MikeG
[subject]
Monday, December 10, 2018, 11:19 (2826 days ago) @ Ron Orbeck
a few years ago to make the 500 Maximum cartridge. Just measured the length that they should be and used a cut off tool to get it close. Then used the case trimmer to get it squared and to proper length. I would reckon that you could do the same thing for making Gary's 510 cases
500L brass
Ron Orbeck
[subject]
Monday, December 10, 2018, 23:36 (2825 days ago) @ Ron Orbeck
Any one have 510 GNR brass about 100 cases I could buy. Or anyone know of any available any where?
My contact cell number is 907 232 9708