Reeder Custom Guns - Scope base recommendation

I have a stainless Bisley Single Six on the way and plan to scope it. Any suggestions for a base? Leopold doesn't list a base for the Single Six and I have no idea of a Blackhawk base would work. I suppose the Weigand base might work if I added another screw (the stock setup with the Weig-a-tinny is just one screw in the rear sight elevation hole).

Post reply

the frame so you won't use it but the center screw hole and the sight screw hole will work fine. We use it all the time. Never a problem.

Post reply

the frame so you won't use it but the center screw hole and the sight screw hole will work fine. We use it all the time. Never a problem.

Post reply

Scope base recommendation

go with the Leupold for the Blackhawk. The front hole is off

Thanks, Gary, I'll go with that.