Gary Reeder
the new Ultimate 357 I showed last night is a very limited
Saturday, December 29, 2018, 12:22

edition revolver and an addition to the long barreled Ultimate 357 we introduced last fall. We plan to build 5 of the new snubbie Ultimate 357 revolvers. The gun is a Ruger Security Six frame with a 3" GP-100 barrel. It took a bit of work mating the much larger GP-100 barrel to the smaller Security Six frame, but it worked out fine. Only one of you got it right on gun and caliber. That was RA, whoever he is. I have enough parts to build 2 of the 3" guns and 2 of the 4" guns and they will be built on the customer's base Security Six. So if you have an old Security Six lying around, turn it into a great carry or truck gun. Only 5 to be made and each will be marked with that number. The current prototype is number 001. The conversion is also not expensive. For the new barrel with the re-threading and re-working of the frame, including taking the sharp hump off the top of the gripframe, plus the refinishing and a full action job, Plus bobbing the hammer for a no snag carry gun, plus Gunfighter Gripping the gun plus your choice of grips is $995 on your gun. And we can do it on a blued Security Six at the same price. Here is the prototype.