Huey's post below re: 321GNR G2 Carbine loads
Regarding 321GNR loads for a G2 Carbine setup got my attention. My setup is a Reeder 16.25" G2 blued barrel/blued receiver with a 2x7 Burris Fullview.
Have worked through four 125gr bullet types with A1680, Sierra Spitzer is the most accurate with 1 hole/3-shot groups @ 50yds. Next is the Nosler, nice tight cloverleaf. Hornady HP is real close to the Nosler. The FP is for plinking. Lost pics of targets during recent move to FL.
Pic-L to R: Nosler AccuBond; Hornady HP; Sierra Spitzer; Sierra FP/HP.
![[image]](images/uploaded/201901251924245c4b6268097ed.jpg)
Pic with two 30 Raptor loads for comparison
Four 321GNRs on left with the two Raptors: 150gr Nosler on left; 150gr Sierra Spitzer on right. Both do 1-hole/3-shots at 50 yards. Sorry, bit out of focus.
![[image]](images/uploaded/201901251940465c4b663e6e58d.jpg)
A pic of my 321GNR G2 Carbine
16.25" bbl, 2x7 Leupold. The stippling was an experiment that I won't repeat. Used an old electric soldering iron and rounded off the sharp edges with a butane torch on low heat. Firm grip in wet weather, a couple friends liked the feel, but it's a great way to nearly ruin a nice smooth nylon stock/forearm set.
![[image]](images/uploaded/201901261910265c4cb0a2cf7b6.jpg)