Reeder Custom Guns - I do not believe that there was a fired case.

Joe W
I do not believe that there was a fired case.
Tuesday, March 05, 2019, 03:59

This was a complete gun that was previously owned by Eric if I am correct.

I was thinking that the 7 GNR was based on the 30/30 but I see that it is on the 7 x 30 Waters. A 30/30 case does not fit in the chamber. I do not have any waters cases

7mm Raptor, loading, forming questions - Joe W, 2019-03-04, 17:53
- Joe, nate and I have been going over this situation. - Gary Reeder, 2019-03-05, 12:43
  - Shoulder/chamber/neck sizing - Joe W, 2019-03-05, 17:48
    - if you can't get it figured out, get it to me and - Gary Reeder, 2019-03-06, 10:57
- Post a picture of the back of the barrel chamber. - WB, 2019-03-04, 18:04
  - Chamber - Joe W, 2019-03-04, 18:45
    - Joe, was there a fired case in the barrel when you got it? - Gary Reeder, 2019-03-04, 21:34
      - I do not believe that there was a fired case. - Joe W, 2019-03-05, 03:59
    - I can see it! There is a teeny spring - WB, 2019-03-04, 19:56
      - I will have to investigate the spring further. - Joe W, 2019-03-05, 04:24
      - it is not a normal spring. It is a flat spring - Gary Reeder, 2019-03-04, 22:01
  - I’ll try, but I have not been able to post - Joe W, 2019-03-04, 18:31