358 Contender

Dennis
[subject]
Sunday, March 24, 2019, 12:35 (2719 days ago)

Been researching what caliber to use for Indiana deer. I got a contender at a great price but it has a 222 Remington barrel (not legal). The 350 Legend is coming out but I have been reloading for 40 years and have 445 Super Mag brass and only one firearm chambered in it. So now I would like all the information you fine people can give me on it. Brass , dies and of course ballistics. I normally use a heavy slow combination heavy bullet and low velocity. I read a lot and post very little

[image]

Gary came out with a unique .35 a couple yrs. ago.

WB
[subject]
Sunday, March 24, 2019, 12:53 (2719 days ago) @ Dennis

It is more than the old .35-30 based upon the .30-30 necked up to .358". This was popular for guys with .32 Winchester Special M1894's that had shot out bores. a re-bore to .35 got them a .35/.30-30. Gary's advancement on the idea surpasses even an Ackley version. He straightened the sides and maxed out the capacity, a sharp crisp neck helps keeping the brass from stretching.

You just run a .30-30 through a FL sizer, shoot a 80% power form load and you have custom brass. It should easily outperform the .35 Remington and work superior with a strong neck to headspace from.

If you NEED a straight walled cartridge to comply with unique handgun hunting rules he also has the .400 GNR that is a .30-30 blown out straight to 10mm or .401 cal. Sort of a shorter, smaller version of the .405 Win. which is .411 cal.

Both of those cartridges are on my radar.

Believe he wants to stay with the 445 cases

Steve
[subject]
Sunday, March 24, 2019, 14:01 (2719 days ago) @ WB

- No text -

The 358 GNR is an excellent Contender round...

Huey
[subject]
Sunday, March 24, 2019, 14:11 (2719 days ago) @ Steve

My personal one is 14" long. Power is above the old 357 Herrett and crowds a heavy loaded 35 Remington.

Loading is quite easy and straight forward. I lube brass with Imperial Sizing Wax and with one pass thru the die you're ready to load.

357/44

Denny
[subject]
Sunday, March 24, 2019, 15:23 (2719 days ago) @ Huey

Looked at this but more case is more powder. Where do you get the dies for necking the 445 case?

Gary has dies for all his calibers...

Huey
[subject]
Sunday, March 24, 2019, 15:28 (2719 days ago) @ Denny

- No text -

355 GNR

Alcorn
[subject]
Sunday, March 24, 2019, 16:47 (2719 days ago) @ Huey

A simpler way to fireform, if just use 30-30 factory loads. I fireformed 60 and did not lose a case. All were perfectly blown out. If you are aiming at something you will be luck to hit it.

powered by my little forum