the 9mm cylinder is so accurate in any Blackhawk, much less my modified custom. It is rattling a .355" bullet down a .357" bore (through .358" throats, if that matters). Plus the bullet must make about an inch jump from the case to engage the rifling! Should be an exercise in frustration but it is not. It's extremely accurate. Also the recoil and blast is much less, seemingly, compared to a .38/.357 firing the same weight bullet at the same velocity. At least it seems to me. Velocity in my 6.5" is identical to my 5" Beretta or FN HP.
With 9mm FMJ running $9 a box of 50 the cylinder pays for itself, in economy, very shortly. Lots cheaper than .22 WMR and the brass will be worth something, goes in your pocket rather than scattered all over.
-
A gun for Shootist Holiday....
- WB, 2019-07-10, 09:43
-
Great question I’ve pondered since 1986
- Curt, 2019-07-10, 18:16
-
I see a pattern forming....
- WB, 2019-07-10, 19:58
-
The platform as much as the round...
- Curt, 2019-07-10, 20:17
-
You're a bit more Skeeterish than me
- WB, 2019-07-10, 21:03
- Being somewhat familiar with the - Abin Sur, 2019-07-11, 04:05
-
You're a bit more Skeeterish than me
- WB, 2019-07-10, 21:03
-
The platform as much as the round...
- Curt, 2019-07-10, 20:17
-
I see a pattern forming....
- WB, 2019-07-10, 19:58
- 8 3/8" M27. It makes me look good as well. . . - ChrisG, 2019-07-10, 12:41
-
1985--THE ORIGINAL SCENARIO CALLED FOR
- JT, 2019-07-10, 12:23
- I had a replica of the original "Skeeter Gun" built - Steve W, 2019-07-10, 12:54
-
the couple of times I went I spent more time talking
- Gary Reeder, 2019-07-10, 11:05
- Yep .. this year I shot a few times .. spent more visiting. (nm) - Jim Taylor, 2019-07-10, 11:11
-
I'd take my Southern Pride
- Grover Sr, 2019-07-10, 10:05
-
PS I don't have
- Grover Sr, 2019-07-10, 10:12
-
I hate to admit it but I have no explanation why
- WB, 2019-07-10, 11:55
-
9mm is not economical.....at 950 rpm :) (nm)
- Woody, 2019-07-10, 20:41
- Loading mags is the worst, hurts my thumbs. (nm) - WB, 2019-07-11, 08:03
-
9mm is not economical.....at 950 rpm :) (nm)
- Woody, 2019-07-10, 20:41
-
Hard to beat a 45 Colt, light and heavy loads (nm)
- Woody, 2019-07-10, 10:38
-
CSA revolver
- stonecold, 2019-07-10, 11:58
-
Agree with Woody
- Alcorn, 2019-07-10, 12:06
- For such a big gun that covers a lot. (nm) - WB, 2019-07-10, 14:19
-
Agree with Woody
- Alcorn, 2019-07-10, 12:06
-
CSA revolver
- stonecold, 2019-07-10, 11:58
-
I hate to admit it but I have no explanation why
- WB, 2019-07-10, 11:55
-
PS I don't have
- Grover Sr, 2019-07-10, 10:12
-
Great question I’ve pondered since 1986
- Curt, 2019-07-10, 18:16