Reeder Custom Guns - I think mine are out of production but

WB
I think mine are out of production but
Saturday, August 24, 2019, 17:57

Mountain Moulds will let you make your own, it's great! Also you can take a LEE push through sizer in .401" and force a .410" cast bullet through on a good press (not a cheap alloy one). Actually you can lightly lube a JSP or JHP .410" and make a .401" in the same manner. Really! I've done many. The shank on a cast bullet will not be altered so that makes things a little more complicated. If the bullets already have a gas check on them you are good to go. They pop out 0.401".

0.010" is all I ever want to go doing this IMO.

The Reeder 38-40 Continues to impress.. - Huey, 2019-08-24, 08:37
- I decided to lower my speeds for comfort in shooting - WB, 2019-08-24, 10:25
  - Scotty where did you get the 200 and 230 molds? (nm) - Asa, 2019-08-24, 11:00
    - I think mine are out of production but - WB, 2019-08-24, 17:57
  - I've got JTs, Lee Martin's and Linebaugh's data... - Huey, 2019-08-24, 10:51
  - Links for the guys... - WB, 2019-08-24, 10:43
    - Gary is building me a 23" G2 Carbine in 38-40 WCF... - Huey, 2019-08-24, 10:59