|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- ? for all you AR DI shooters. Since I am a novice to this,
- SPB,
2018-02-09, 11:59
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- the internet wizards are actually internet idiots
- Gary Reeder,
2018-02-09, 12:24
- Ok, so a wipe down with CLP or similar, and a bit of grease
- SPB,
2018-02-09, 12:51
- I wouldn't use CLP unless you live in south Florida
- Gary Reeder,
2018-02-09, 13:27
- Good to know. Thank you Gary. (nm) - SPB, 2018-02-09, 13:33
- I wouldn't use CLP unless you live in south Florida
- Gary Reeder,
2018-02-09, 13:27
- Ok, so a wipe down with CLP or similar, and a bit of grease
- SPB,
2018-02-09, 12:51
- lots of oil/lube on bolt carrier drippin oil - carl hackney, 2018-02-09, 12:15
- I'M GUESSING KEEP IT OILED (nm)
- JT,
2018-02-09, 12:06
- Agree, just trying to understand how wet? (nm)
- SPB,
2018-02-09, 12:18
- Some guys put fluid in the supressors
- WB,
2018-02-09, 14:07
- Browning developed the 1917 A1 water cooled machine gun
- Gary Reeder,
2018-02-09, 14:44
- Gun oil - Alcorn, 2018-02-09, 15:10
- Now that's running it wet! (nm) - WB, 2018-02-09, 15:04
- Browning developed the 1917 A1 water cooled machine gun
- Gary Reeder,
2018-02-09, 14:44
- Some guys put fluid in the supressors
- WB,
2018-02-09, 14:07
- Agree, just trying to understand how wet? (nm)
- SPB,
2018-02-09, 12:18
- the internet wizards are actually internet idiots
- Gary Reeder,
2018-02-09, 12:24
- Remington on the Skids
- Stuart in GA,
2018-02-09, 09:06
- NEI mold handles?
- bigboar,
2018-02-09, 08:46
- I have ground the Lee 6 cav handles down to fit just fine (nm)
- Sean Harper,
2018-02-09, 13:56
- I have no means to do that what do you suggest? (nm) - bigboar, 2018-02-09, 17:41
- They are so inexpensive I cut them to fit everything! (nm)
- WB,
2018-02-09, 14:08
- You cut them, the mold or the lee handles? (nm)
- bigboar,
2018-02-09, 17:39
- Always cut the cheap part, LEE handles - WB, 2018-02-09, 18:08
- grind down the flat that goes in the mold side slots (nm) - Gary Reeder, 2018-02-09, 17:56
- You cut them, the mold or the lee handles? (nm)
- bigboar,
2018-02-09, 17:39
- RCBS fit them (nm) - Curt, 2018-02-09, 09:35
- I have ground the Lee 6 cav handles down to fit just fine (nm)
- Sean Harper,
2018-02-09, 13:56
- those that boycotted the NFL can be proud
- Gary Reeder,
2018-02-08, 21:20
- Yay! (nm) - Grover Sr, 2018-02-10, 18:07
- The irony is - Steve W, 2018-02-09, 08:25
- Foosball is the devil.
- WB,
2018-02-09, 07:23
- I loved playing football and baseball, but never got
- Brent Foy,
2018-02-09, 12:20
- I CAN'TCOUNT THE NUMBER OF FOOTBALL, BASKETBALL, BASEBALL, - JT, 2018-02-09, 12:46
- I loved playing football and baseball, but never got
- Brent Foy,
2018-02-09, 12:20
- The liberals at NBC just can't comprehend... - Huey, 2018-02-08, 21:50
- Wow! I received the case today.
- Larry Farley,
2018-02-08, 20:40
- I wish we could have got more. The new dealer
- Gary Reeder,
2018-02-08, 20:47
- The cases are worth every bit of $215 - Blake, 2018-02-09, 05:45
- Got mine yesterday, helluva deal is right! (nm) - Amede, 2018-02-08, 21:19
- I wish we could have got more. The new dealer
- Gary Reeder,
2018-02-08, 20:47
- Is there a Maximum Barrel length we need
- O’ Gary,
2018-02-08, 19:18
- the only restrictuion is it has to be on our medium frame so - Gary Reeder, 2018-02-08, 20:43
- American Classic Projectiles
- rjder64,
2018-02-08, 16:43
- Go to
- BlackPete,
2018-02-08, 17:46
- The REAL .50/250 bullet should be a good one! (nm)
- WB,
2018-02-08, 20:49
- I have a couple of those moulds... - WB, 2018-02-09, 07:41
- The REAL .50/250 bullet should be a good one! (nm)
- WB,
2018-02-08, 20:49
- Go to
- BlackPete,
2018-02-08, 17:46
- 22 mag and 218 bee
- BlackPete,
2018-02-08, 15:58
- OK Mr. PITA, you strike out again. You can't have a
- Gary Reeder,
2018-02-08, 16:01
- I'VE GOT ONE THAT DOES BOTH
- JT,
2018-02-08, 16:23
- actually John, now that you mention it, we could do
- Gary Reeder,
2018-02-08, 16:53
- TEN GRAND. NOW WE SEE HOW SERIOUS HE IS!! (nm)
- JT,
2018-02-08, 17:38
- Biting my tongue ! (nm) - BlackPete, 2018-02-08, 17:50
- I’ll pass! That’s a trip to Africa? (nm) - BlackPete, 2018-02-08, 17:30
- TEN GRAND. NOW WE SEE HOW SERIOUS HE IS!! (nm)
- JT,
2018-02-08, 17:38
- actually John, now that you mention it, we could do
- Gary Reeder,
2018-02-08, 16:53
- Ok, ok just seeing how far I can go - BlackPete, 2018-02-08, 16:18
- Well, technically... - Mike Casselton, 2018-02-08, 16:10
- I'VE GOT ONE THAT DOES BOTH
- JT,
2018-02-08, 16:23
- OK Mr. PITA, you strike out again. You can't have a
- Gary Reeder,
2018-02-08, 16:01
- 218Bee and 224GNR
- BlackPete,
2018-02-08, 13:52
- it can but it would require the stretch frame as
- Gary Reeder,
2018-02-08, 13:55
- Thanks Gary I am saving the professional hunter - BlackPete, 2018-02-08, 15:02
- it can but it would require the stretch frame as
- Gary Reeder,
2018-02-08, 13:55
- after posting yesterday that we had 500 Linebaugh brass
- Gary Reeder,
2018-02-08, 13:02
- these varying rim thicknesses are driving us batty
- Gary Reeder,
2018-02-08, 12:49
- I had a problem with the .30-30 in .256 Falcon - WB, 2018-02-08, 15:03
- THIS IS A MAJOR PROBLEM WITH THE .22 HORNET ALSO (nm) - JT, 2018-02-08, 14:23
- Hornady Brass don't work for my .41 GNR
- Da Duke,
2018-02-08, 14:17
- I couldnt use the starline had to go Remington (nm)
- Amede,
2018-02-08, 18:09
- in years past I always recommended the Remington brass - Gary Reeder, 2018-02-08, 20:45
- Colleen picked up a big batch of 30-30 brass for me
- Gary Reeder,
2018-02-08, 15:51
- Bob Baker was doing the .500 Wyoming
- WB,
2018-02-09, 07:14
- most of the PHs in Africa will not use a belted magnum rifle - Gary Reeder, 2018-02-09, 14:10
- Isn’t Federal within spec? Think I recall this
- O’ Gary,
2018-02-08, 18:30
- Yep...only fed brass in my 300 (nm)
- Drdougrx,
2018-02-09, 04:47
- I gave Colleen a Colt Sauer in 300 Win Mag for her - Gary Reeder, 2018-02-09, 13:37
- Yep...only fed brass in my 300 (nm)
- Drdougrx,
2018-02-09, 04:47
- Bob Baker was doing the .500 Wyoming
- WB,
2018-02-09, 07:14
- I couldnt use the starline had to go Remington (nm)
- Amede,
2018-02-08, 18:09
- The 251 Falcon will be another build...
- Huey,
2018-02-08, 11:45
- What is the 251 falcon parent case (nm)
- Blake,
2018-02-08, 12:48
- 25-20 see below
- Gary Reeder,
2018-02-08, 12:55
- Can the old Marlin 94 in 25-20 be rechambered to
- Brent Foy,
2018-02-08, 13:09
- that would work fine. The pressure curve is a soft one - Gary Reeder, 2018-02-08, 13:28
- Can the old Marlin 94 in 25-20 be rechambered to
- Brent Foy,
2018-02-08, 13:09
- 25-20 see below
- Gary Reeder,
2018-02-08, 12:55
- That does sound like a lot of fun. (nm)
- Brent Foy,
2018-02-08, 12:02
- My present 250 GNR has a 1 in 14" twist (I think)...
- Huey,
2018-02-08, 12:15
- the current gun we are working on has a 10 twist barrel and - Gary Reeder, 2018-02-08, 12:42
- I shot my first deer with a 25-20, and most - Brent Foy, 2018-02-08, 12:39
- My present 250 GNR has a 1 in 14" twist (I think)...
- Huey,
2018-02-08, 12:15
- What is the 251 falcon parent case (nm)
- Blake,
2018-02-08, 12:48
- Josh got a tracking number for you
- Blake,
2018-02-08, 09:10
- Thanks Blake! (nm) - Josh, 2018-02-08, 15:52
- Finely, a new story that not racial, political,
- jthomson,
2018-02-08, 07:29
- Sometimes the goodness that God put in man shines through. (nm) - SPB, 2018-02-08, 09:38
- so you want to go to Africa? How about march 2019?
- Gary Reeder,
2018-02-07, 22:52
- If things work out in the next few months... (nm) - Drdougrx, 2018-02-09, 08:40
- if all this works out, depending upon John's schedule - Gary Reeder, 2018-02-08, 13:51
- Email inbound (nm)
- Blake,
2018-02-08, 10:19
- you are in Blake (nm) - Gary Reeder, 2018-02-08, 12:55
- Africa '19 - Jim and Nancy Frost, 2018-02-08, 07:42
- I'll go!
- Alcron,
2018-02-08, 02:23
- only if you learn to spell your name right first (nm) - Gary Reeder, 2018-02-08, 12:42
- a note to Tom..you are probably not aware of one of our few
- Gary Reeder,
2018-02-07, 21:03
- OK (nm) - Tom, 2018-02-08, 07:43
- The serial number on my old contender is S7576. Doesn't make
- Lymey,
2018-02-07, 19:03
- Your frame was made in early 1993 (nm)
- Randy Barnett,
2018-02-08, 05:45
- Thanks Randy. (nm) - lymey, 2018-02-08, 13:13
- the S was normally a sign of stainless and they started the
- Gary Reeder,
2018-02-07, 19:33
- Thanks Gary (nm) - Lymey, 2018-02-07, 20:29
- Your frame was made in early 1993 (nm)
- Randy Barnett,
2018-02-08, 05:45
- back from Phoenix. That traffic down there is a killer
- Gary Reeder,
2018-02-07, 17:42
- We moved to Cave Creek in 1986 just
- Brent Foy,
2018-02-08, 12:16
- I lived in Cave Creek
- Jim Taylor,
2018-02-08, 12:34
- It was nice when we moved there, but now - Brent Foy, 2018-02-08, 12:43
- I lived in Cave Creek
- Jim Taylor,
2018-02-08, 12:34
- Phoenix was nice .... in the 1950's.... (nm)
- Jim Taylor,
2018-02-08, 06:42
- SO WAS JUST ABOUT EVERY PLACE! (nm)
- JT,
2018-02-08, 06:57
- Good point JT. (nm) - SPB, 2018-02-08, 14:26
- SO WAS JUST ABOUT EVERY PLACE! (nm)
- JT,
2018-02-08, 06:57
- I spent a BUNCH of weekends there many - Larryh, 2018-02-07, 21:14
- We moved to Cave Creek in 1986 just
- Brent Foy,
2018-02-08, 12:16
- No more His power ??
- Hobbit,
2018-02-07, 17:11
- From what I hear their tooling is worn out and it would cost - Gary Reeder, 2018-02-07, 17:40
- Huey! Thanks again! (nm)
- BlackPete,
2018-02-07, 15:25
- No Problem... (nm) - Huey, 2018-02-07, 21:15
- Gary hooked me up for expanding case mouths.
- WB,
2018-02-07, 14:43
- WB that is great info? Good job! (nm) - BlackPete, 2018-02-07, 14:51
- 500 linebaugh
- Twf,
2018-02-07, 13:46
- load data - jack s, 2018-02-07, 17:48
- perhaps - Brian T, 2018-02-07, 16:27
- it is an easy cartridge to load (nm)
- James,
2018-02-07, 14:25
- I would not give BB a single penny (nm) - AlanT, 2018-02-07, 16:00
- Yeah, loaded hotter than those Ghost Peppers too!
- WB,
2018-02-07, 14:52
- absolutely, stay away from BB ammo if you value your gun (nm)
- Charlie Anderson`,
2018-02-07, 16:32
- Unfortunately, BB is the only option we have locally - AkRay, 2018-02-08, 09:52
- 500l
- Frank Simon,
2018-02-07, 15:32
- Prices - Tom, 2018-02-08, 11:24
- A labor of love...
- WB,
2018-02-07, 16:02
- Another option
- Alcorn,
2018-02-07, 16:53
- we also have plenty of 500 Linebaugh brass. I had
- Gary Reeder,
2018-02-07, 17:43
- Load data - Alcorn, 2018-02-08, 03:08
- we also have plenty of 500 Linebaugh brass. I had
- Gary Reeder,
2018-02-07, 17:43
- Another option
- Alcorn,
2018-02-07, 16:53
- absolutely, stay away from BB ammo if you value your gun (nm)
- Charlie Anderson`,
2018-02-07, 16:32
- 15:17 to Paris comes out this Friday!
- Kevin E,
2018-02-07, 10:48
- God fearing, duty, honor, earned heroism, guns and non PC... - Kevin E, 2018-02-09, 14:23
- we are working on a deal with some new binocs that were
- Gary Reeder,
2018-02-07, 10:18
- I bought the Redfields
- Dave H.,
2018-02-07, 17:52
- I would hate to have to choose between my Redfields - Gary Reeder, 2018-02-07, 19:42
- I bought the Redfields
- Dave H.,
2018-02-07, 17:52
- I will be down in Phoenix most of the day today so
- Gary Reeder,
2018-02-07, 10:11
- You doing OK Hoss? At least enjoy the time away. (nm)
- WB,
2018-02-07, 14:56
- when I die and go to Hell I will be in Phoenix traffic at
- Gary Reeder,
2018-02-07, 17:44
- I pray not. (nm) - SPB, 2018-02-07, 19:51
- when I die and go to Hell I will be in Phoenix traffic at
- Gary Reeder,
2018-02-07, 17:44
- You doing OK Hoss? At least enjoy the time away. (nm)
- WB,
2018-02-07, 14:56