Reeder Custom Guns - Needed About 100 .41 Magnum Gas Checks

Let me know please if you have any available

I have some of the old Lyman brass ones. I have some other Gator checks of some sort. I just collected a batch of tight Gator checks from Sage's that I'm using for a special shank .40 application. They are even a little tight for that.

Let me know what you need and I can certainly hook you up. No problemo.

Post reply

- No text -

Post reply

Today, headed your way. Internally they seem to MIC about 0.393 -0.394” but they are the standard for all the old classic .41 SWCGC moulds we all love.

[image]

Post reply

ALSO HAVE SOME COMING FROM SAGE SO I AM IN GOOD SHAPE

Post reply

The .41 can use several different checks. .40 on the other hand has proven a bit difficult. But where there is a will there is a way.

Needed About 100 .41 Magnum Gas Checks

I've got about four flavors. Special shank needs?

THEY MEASURE .400"

I’ll put some of these Lyman .41 checks into the mail

THANK YOU WB. I

Headed to same old place on Pomona

THANK YOU!

I use the .416 gator checks for a .393 shank if you need.

Here are the 4 sizes from the Sage gas check site for .41’s

THANK YOU!