The core right out of the bullet as it transitioned into the bore through the forcing cone. A second round blew that out and “ringed” the bore. It shot a couple rounds cleaned then went all over the target. Cleaned it would start the process again. You couldn’t see it with your eyes but you could feel it with your fingers running along the outside. Down the bore from the back you could barely see the doughnut just ahead of the forcing cone. We sent the gun back to the guy we bought it from. It needed a new barrel put on.
-
45lc to 454 Casull
- Caguilera, 2025-11-13, 14:12
- Even if it didn’t blow into micro particles - WB, 2025-11-14, 20:24
- No frame upgrade - Caguilera, 2025-11-14, 01:32
-
It would work for 1 shot, in other words the 454 is HIGH
- Sean Harper, 2025-11-13, 14:19
- Sean is correct. - Jim Taylor, 2025-11-13, 14:53
-
I want to see the video!!! (nm)
- AlanT, 2025-11-13, 14:53
-
We had an early Taurus Tracker .454 that had blown
- WB, 2025-11-13, 18:40
- I believe that it's possible . . . - ORG, 2025-11-14, 10:03
-
We had an early Taurus Tracker .454 that had blown
- WB, 2025-11-13, 18:40