Reeder Custom Guns - Indeed you can...

Huey
Indeed you can...
Thursday, November 28, 2019, 10:42

I'm sizing them down in a Lee .401" Sizer Die. Using only one step now, but feel two steps would be a better plan.

I'll eventually order Custom Lee Dies in .405" and .400" to get perfect sized bullets.

I've shot them thru plyboard and into a dirt mound at 75 yards. They re holding up fairly well for that.

When I get farther into this testing, I'll learn more in sure.

Interesting discussion...sizing 41cal to 40 - Drdougrx, 2019-11-28, 10:15
- Most likely the .41 cal are rated for higher - Asa, 2019-11-28, 13:16
- Yes, it’s an old trick. .312/.309, .358/.356, .458/.452, . - WB, 2019-11-28, 11:32
- Indeed you can... - Huey, 2019-11-28, 10:42
  - I would of thought ... - Josh, 2019-11-28, 13:06
    - Doesnt work harden them that much. (nm) - Asa, 2019-11-28, 13:10
      - All it does is squeeze them down a few thousandths... - Huey, 2019-11-28, 13:13
        On rare occasion you can separate the core - WB, 2019-11-28, 14:32

powered by my little forum