Reeder Custom Guns - Yes, it’s an old trick. .312/.309, .358/.356, .458/.452, .

WB
Yes, it’s an old trick. .312/.309, .358/.356, .458/.452, .
Thursday, November 28, 2019, 11:32

The .410 to .401 is about as far as you need to go. Some brands respond differently to the squeeze. Cast bullets get grooves scrubbed sometimes but paint coating no one cares. They all shoot!

I’ve made some custom .45 Colt bullets from .458.

Interesting discussion...sizing 41cal to 40 - Drdougrx, 2019-11-28, 10:15
- Most likely the .41 cal are rated for higher - Asa, 2019-11-28, 13:16
- Yes, it’s an old trick. .312/.309, .358/.356, .458/.452, . - WB, 2019-11-28, 11:32
- Indeed you can... - Huey, 2019-11-28, 10:42
  - I would of thought ... - Josh, 2019-11-28, 13:06
    - Doesnt work harden them that much. (nm) - Asa, 2019-11-28, 13:10
      - All it does is squeeze them down a few thousandths... - Huey, 2019-11-28, 13:13
        On rare occasion you can separate the core - WB, 2019-11-28, 14:32