Reeder Custom Guns - Blue or red will work for mounts

Randy Barnett
Blue or red will work for mounts
Wednesday, April 15, 2020, 09:43

I have used both and either can be removed with a screwdriver. I have heard some people needing to apply heat to remove the red, but I haven't encountered that. Blue should work fine.

The key is to thoroughly clean the base, screws, and screw holes with a degreaser or alcohol. If you haven't purchased the Loctite, see if you can find the sticks. Much easier to apply without getting it everywhere.

[image]

Loc-Tite - Tom, 2020-04-15, 07:25
- Loc-Tite - David R, 2020-04-15, 09:48
- Don’t rely on color - Randy Barnett, 2020-04-15, 08:46
  - Loctite colors - Randy Barnett, 2020-04-15, 09:01
    - Once applied and dried - Tom, 2020-04-15, 09:29
      - Blue or red will work for mounts - Randy Barnett, 2020-04-15, 09:43
- I use blue. (nm) - Amede, 2020-04-15, 08:37
  - Yes, Blue for sure. - WB, 2020-04-15, 09:41
    - I use red for everything except the screws on the rings. I - Gary Reeder, 2020-04-15, 12:02