Reeder Custom Guns - You can use it in a cleaned out lubesizer, just more efficie

Asa
You can use it in a cleaned out lubesizer, just more efficie
Monday, May 18, 2020, 15:13

with the lee push through sizer dies. Another option for the push through is the Star. By the way if the finish comes off during sizing, it wasn't gonna make it down the barrel at xxxxFPS with xxxxxxPSI behind it anyway. The Powder coating, if applied correctly and a quality product is used, should withstand the journey and possibly the impact. The sure fire test is to cure and then sacrifice a bullet by smacking it nose first with a hammer, finish should not flake or peel.

OK WB, I have been waiting since Friday for you - charlie A., 2020-05-18, 13:08
- Some guys get very technical, I'm very basic - WB, 2020-05-18, 14:01
  - Power coating bullets - Randy Barnett, 2020-05-18, 16:29
  - couple more questions. You say size them in a Lee - charlie A., 2020-05-18, 14:38
    - I use the acetone method - Chance Dunlap, 2020-05-18, 18:52
    - It shold not rub off. Try the Lyman, no lube needed. - WB, 2020-05-18, 18:44
    - I found Lee push through sizer kits as low as $20. (nm) - DinCA, 2020-05-18, 17:08
    - You can use it in a cleaned out lubesizer, just more efficie - Asa, 2020-05-18, 15:13