Reeder Custom Guns - it needs to be immersed in a tank at around 500 degrees

Gary Reeder
it needs to be immersed in a tank at around 500 degrees
Wednesday, September 09, 2020, 16:39

for a few minutes. The oven doesn't work very well. Not hot enough and one side will color while the other side doesn't. We do a lot of it and to do it right you need a tank and special salts. Plus the heating unit etc.

Any recommendations for "nitre blue" touch-up? - Greg M., 2020-09-09, 15:09
- that is where the term "bluing" came from but as - Gary Reeder, 2020-09-09, 15:41
  - Thank you for the responses, gents - Greg M., 2020-09-09, 16:54
    - IT IS NOT UGLY!! IT PROBABLY - JT, 2020-09-09, 21:25
      - KIRST CONVERTERS WORK FINE. (nm) - JT, 2020-09-09, 21:26
  - That’s a pro set up. I have been intrigued about - WB, 2020-09-09, 16:01
    - it needs to be immersed in a tank at around 500 degrees - Gary Reeder, 2020-09-09, 16:39