Reeder Custom Guns

Jim Taylor
OR ....
Tuesday, January 26, 2021, 18:23

Using a round file as a milling machine, mill a groove on the top strap so you can lower the rear sight. On a .22 that large you could mill out quite a bit.

The sight regulation saga continues... - WB, 2021-01-26, 17:11
- WB, you may NOT want to 'double that'... - backroadsrambler, 2021-01-26, 17:55
  - That's an idea! I meant 0.030" not half sight. - WB, 2021-01-26, 18:25
    - You can find taller front sights for your - Sid R, 2021-01-27, 07:14
    - There is 0.160" +/- front sight left. (nm) - WB, 2021-01-26, 19:09
  - OR .... - Jim Taylor, 2021-01-26, 18:23
    - The rear is the origins of all the ails. - WB, 2021-01-26, 18:27