Reeder Custom Guns - I’ve not had that problem either

steve todd
I’ve not had that problem either
Saturday, September 04, 2021, 04:51

Pieces of the caps jamming between the cylinder and the hammer cutout of the frame has slowed things down a bit with the Slix-shot cones (nipples). I’ll switch to Treso cones in the future, the Treso cones have a smaller hole in the chamber side of the cones.
I use lard over the loaded chamber mouth to keep the fouling soft on the first cylinder loading, but i don’t re-apply lard when reloading in “the field”. I also don’t use the substitute black powder, just 3f.

Shooting the 1862 Police Pistol - Jim Taylor, 2021-09-03, 09:49
- Looks like it shoots pretty good! - steve todd, 2021-09-03, 10:03
  - That is amazing, i haven’t had luck like that - steve todd, 2021-09-03, 10:17
  - Heavier loads will lower the point of impact ... - Jim Taylor, 2021-09-03, 10:04
    - Possibles bag? Just got #105 Woodland from the Leatherman.- - Jeff Spencer, 2021-09-03, 13:48
      - I just looked those up, very nice! (nm) - Df, 2021-09-04, 04:40
- 40 YEARS OLD AND STILL WORKING? HEY - JT, 2021-09-03, 10:00
  - 62 Police - Carl L, 2021-09-03, 19:48
    - I have not had any problem like that. (nm) - Jim Taylor, 2021-09-03, 20:44
      - I’ve not had that problem either - steve todd, 2021-09-04, 04:51