you mentioned using Leupold Dual Dovetail rings and bases exclusivity. My favorite as well, especially for heavy recoil weapons. My question has to do with the alignment of the rings, for those not familiar with the set up both rings are cammed into place with a quarter turn into the base, thus locking them into place. I have always been concerned about getting the two rings aligned properly. Do you have any special tricks that you can share ? I have been using a two foot section of dowel rod followed by lapping the rings.
-
Question for Gary, in a thread below on loctite
- jthomson, 2022-06-06, 05:36
-
Not Gary but I have a 14” piece of 1” diameter aluminum
- Blake, 2022-06-06, 09:09
-
Blake has it right. When you think you have it in line
- Gary Reeder, 2022-06-06, 10:08
- yeah pretty much the same process except for the - jthomson, 2022-06-06, 14:29
-
Blake has it right. When you think you have it in line
- Gary Reeder, 2022-06-06, 10:08
-
Not Gary but I have a 14” piece of 1” diameter aluminum
- Blake, 2022-06-06, 09:09