The TC stocks and such are getting expensive. My .470 NE barrel I re-tapped the barrel for the 12 ga. Shotgun forend. Erik has one too and just used the rifle forend with the tiny head screws. (With no problems reported I might add) My .470 I was able to add weight to get it near 10 lbs. That was very comfortable shooting with the brake. Laminated furniture was a BIG mistake however. It broke no matter what I did.
The big head screw, 12 ga. forend is arguably the best set-up but a little challenging to put all together. Truly now that it’s generally out of production. I’ll likely just mod the smaller (current tap hole) rifle forend with some washers so it can’t pull through under recoil.
I mounted a longer, 6-inch, eye relief fixed power scope on Doug’s .500 Encore set up at 10 lbs. No matter the warnings somebody eventually would get scope dinked on the eyebrow and bleed a little. The better set up would be a red dot sight! FWIW
-
Selfish 586 GNR or 610 GNR
- TBUCK59, 2022-12-03, 23:09
-
I have one of Gary’s 500 Nitro Express Encore rifles
- Blake, 2022-12-04, 12:05
-
I have a .500 NE barrel also. Need to get it running
- WB, 2022-12-05, 08:55
- I remember you talking about the problems you had - Blake, 2022-12-07, 07:08
- We have built a LOT of 470 Nitro barrels and guns - Gary Reeder, 2022-12-05, 16:10
-
I have a .500 NE barrel also. Need to get it running
- WB, 2022-12-05, 08:55
-
I think Denning ended up with one.
- WB, 2022-12-04, 07:56
- There were a total of 10 guns chambered in either 586 GNR or - Gary Reeder, 2022-12-04, 11:28
- You can email me your questions - Bob Denning, 2022-12-04, 09:04
-
I have one of Gary’s 500 Nitro Express Encore rifles
- Blake, 2022-12-04, 12:05