Reeder Custom Guns - I remember you talking about the problems you had

Blake
I remember you talking about the problems you had
Wednesday, December 07, 2022, 07:08

With the laminate stock’s. I had Gary add 3 screw holes in the barrel. And I bedded the forend to the barrel and the stock to the receiver with “right stuff” , it’s an automotive sealant/adhesive, dependent on how you apply it. You could pull the screws out of the forend and it won’t come off during recoil! It is possible to remove the stock and forend but it will destroy the woods. The adhesive on the other hand will come right off the metal with your fingernail and won’t effect the finish of the metal. I have like 50+ rounds through my 500NE with no problems with the furniture.
[image] [image] [image] [image] [image]

Selfish 586 GNR or 610 GNR - TBUCK59, 2022-12-03, 23:09
- I have one of Gary’s 500 Nitro Express Encore rifles - Blake, 2022-12-04, 12:05
  - I have a .500 NE barrel also. Need to get it running - WB, 2022-12-05, 08:55
    - I remember you talking about the problems you had - Blake, 2022-12-07, 07:08
    - We have built a LOT of 470 Nitro barrels and guns - Gary Reeder, 2022-12-05, 16:10
- I think Denning ended up with one. - WB, 2022-12-04, 07:56
  - There were a total of 10 guns chambered in either 586 GNR or - Gary Reeder, 2022-12-04, 11:28
  - You can email me your questions - Bob Denning, 2022-12-04, 09:04