Reeder Custom Guns - That cartridge is loaded way to hot in my opinion

Blake
That cartridge is loaded way to hot in my opinion
Saturday, May 27, 2023, 20:43

I have seen “factory” ammo loaded so hot the primers flow back into the firing pin hole! My guess is either the extractor has a problem or the round is so hot it’s sticking in the chamber and the exterior can’t pull it until the round cools a tad longer than it takes the slide to cycle. What pound recoil spring are you using? And look at the primers on your fired case’s. See if they are flat or have a spur from flowing backwards. Need to see a dent to be sane in my book.

1911 help! - Coloradoyaler, 2023-05-27, 17:16
- Extractor Sounds Likely - Revolvers&1911s, 2023-05-28, 16:29
- As I read this my first thought was - JT, 2023-05-28, 10:04
  - Taffin test 460 Rowland - Coloradoyaler, 2023-05-29, 09:28
  - John and Blake are right. For your first 1911 - Gary Reeder, 2023-05-28, 19:33
  - Because I am not new to big bore handguns - Coloradoyaler, 2023-05-28, 12:14
    - Anemic? The finest fighting handgun ever - JT, 2023-05-28, 20:29
      - John, it's something to play with and to learn about. (nm) - Coloradoyaler, 2023-05-28, 21:56
      - I know of one boar in tn it couldn't kill (nm) - Coloradoyaler, 2023-05-28, 21:52
      - Exactly! Never found it anemic on anything I shot. (nm) - Jim Taylor, 2023-05-28, 20:42
- Is the hammer back ready to fire, or at half - Blake, 2023-05-27, 17:43
  - Yep hammer is all the way back (nm) - Coloradoyaler, 2023-05-27, 20:09
    - That cartridge is loaded way to hot in my opinion - Blake, 2023-05-27, 20:43
      - AMEN (nm) - Gary Reeder, 2023-05-28, 19:33
      - Could I have damaged anything driving the novak sight out? (nm) - Coloradoyaler, 2023-05-27, 22:29
        No, but you may have done damage to the gun with those - Gary Reeder, 2023-05-28, 20:41
      - Thanks Blake - Coloradoyaler, 2023-05-27, 21:33
        What do the primer’s look like? Are there extractor - Blake, 2023-05-28, 03:56
        Buffalo bore 230gr and 255gr - Coloradoyaler, 2023-05-28, 07:42
        Extractor marks - Coloradoyaler, 2023-05-28, 08:55
        Looks like the extractor is denting the case - Blake, 2023-05-28, 11:00
        I will order on tuesday. - Coloradoyaler, 2023-05-28, 12:15
        It is part of the trigger group - Blake, 2023-05-28, 12:59
        Oh ok. Not messing with the trigger - Coloradoyaler, 2023-05-28, 13:14
        I would strongly recommend staying away from the - Gary Reeder, 2023-05-28, 19:38
        Blake is a 1911/.45 Super Guru - WB, 2023-05-28, 17:33
        I have wanted to play with a G21 - Derek, 2023-05-28, 18:05