I've shot some of the Rowland stuff and that does not cause too much alarm, the ammo looks warm but not the classic primer flattening BB stuff. Some of it is HOT! How the gun is set up is very important. Using a "kit" was a good idea, parts should be well engineered.
But that old gun is not designed for that rough treatment. The swinging link has lots more moving parts than some late autos. Its a machine, things are in time. I experimented with a G21 Glock using custom throating, chambered muzzle brake, hefty springs. It no doubt greatly accelerates wear, but the round is impressive if it will feed it. The Glock seems more tolerant than the 1911. I've done very naughty things with the G21 platform in .45 and 10mm cal.
-
1911 help!
- Coloradoyaler, 2023-05-27, 17:16
- Extractor Sounds Likely - Revolvers&1911s, 2023-05-28, 16:29
-
As I read this my first thought was
- JT, 2023-05-28, 10:04
- Taffin test 460 Rowland - Coloradoyaler, 2023-05-29, 09:28
- John and Blake are right. For your first 1911 - Gary Reeder, 2023-05-28, 19:33
-
Because I am not new to big bore handguns
- Coloradoyaler, 2023-05-28, 12:14
-
Anemic? The finest fighting handgun ever
- JT, 2023-05-28, 20:29
- John, it's something to play with and to learn about. (nm) - Coloradoyaler, 2023-05-28, 21:56
- I know of one boar in tn it couldn't kill (nm) - Coloradoyaler, 2023-05-28, 21:52
- Exactly! Never found it anemic on anything I shot. (nm) - Jim Taylor, 2023-05-28, 20:42
-
Anemic? The finest fighting handgun ever
- JT, 2023-05-28, 20:29
-
Is the hammer back ready to fire, or at half
- Blake, 2023-05-27, 17:43
-
Yep hammer is all the way back (nm)
- Coloradoyaler, 2023-05-27, 20:09
-
That cartridge is loaded way to hot in my opinion
- Blake, 2023-05-27, 20:43
- AMEN (nm) - Gary Reeder, 2023-05-28, 19:33
-
Could I have damaged anything driving the novak sight out? (nm)
- Coloradoyaler, 2023-05-27, 22:29
- No, but you may have done damage to the gun with those - Gary Reeder, 2023-05-28, 20:41
-
Thanks Blake
- Coloradoyaler, 2023-05-27, 21:33
-
What do the primer’s look like? Are there extractor
- Blake, 2023-05-28, 03:56
-
Buffalo bore 230gr and 255gr
- Coloradoyaler, 2023-05-28, 07:42
-
Extractor marks
- Coloradoyaler, 2023-05-28, 08:55
-
Looks like the extractor is denting the case
- Blake, 2023-05-28, 11:00
-
I will order on tuesday.
- Coloradoyaler, 2023-05-28, 12:15
-
It is part of the trigger group
- Blake, 2023-05-28, 12:59
-
Oh ok. Not messing with the trigger
- Coloradoyaler, 2023-05-28, 13:14
- I would strongly recommend staying away from the - Gary Reeder, 2023-05-28, 19:38
-
Blake is a 1911/.45 Super Guru
- WB, 2023-05-28, 17:33
- I have wanted to play with a G21 - Derek, 2023-05-28, 18:05
-
Oh ok. Not messing with the trigger
- Coloradoyaler, 2023-05-28, 13:14
-
It is part of the trigger group
- Blake, 2023-05-28, 12:59
-
I will order on tuesday.
- Coloradoyaler, 2023-05-28, 12:15
-
Looks like the extractor is denting the case
- Blake, 2023-05-28, 11:00
-
Extractor marks
- Coloradoyaler, 2023-05-28, 08:55
-
Buffalo bore 230gr and 255gr
- Coloradoyaler, 2023-05-28, 07:42
-
What do the primer’s look like? Are there extractor
- Blake, 2023-05-28, 03:56
-
That cartridge is loaded way to hot in my opinion
- Blake, 2023-05-27, 20:43
-
Yep hammer is all the way back (nm)
- Coloradoyaler, 2023-05-27, 20:09