The .401 GNR, .44 Magnum necked to .400" and loaded hot. Sort of a safer high pressure .38-40 WCF. I know some load .38-40 hot but oh my, if you accidentally stuck a full case load of H110, and a heavy LBT, in an old SA or new Service! I am subject to have an old antique so chambered gun around close, as well as other .38-40 guns that don't need THAT hot a load shot threw them. It makes lots of sense to me. Brass for a .44 Mag. is lots easier to source than .38-40 too!
The .401 shoots a 200 gr. at just under 1600 fps in my 6". I can go factory produced projectile weights from 155 to around 230 gr. It's a little brother to the .410 GNR on the .454. My second cylinder is .40 S&W. I was going to do 10mm but .40 brass is so cheap by comparison and I only have to seat the bullet long to load full 10mm loads.
One of my later and more radical contracted builds.
![[image]](images/uploaded/202306122109306487898a3a1ae.jpg)
![[image]](images/uploaded/20230612211001648789a92d6c0.jpg)
-
One not talked about much...
- WB, 2023-06-12, 14:14
- beautiful weapon Scotty (nm) - Lynn41, 2023-06-13, 07:05
- Like that #5 grip too! (nm) - Derek, 2023-06-12, 16:21
-
Very handy and a beauty. The scalloped and
- Darryl T., 2023-06-12, 15:34
- Every once in a while I use extra cylinders. - WB, 2023-06-13, 14:00