bore and if it didn't shoot well I think John would have let me know. Plus we have had probably a hundred 32s thru the years, maybe more that we used a .308 bore on and never a problem. An older gunsmith who was very well known at that time, probably late 70s, told me then to use 308 bore on all 32s so I have ever since and never a problem.
-
Hmmmm primer crater
- Paul, 2023-10-25, 15:37
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
The bore in the H&R could be a bit tight, causing back
- Gary Reeder, 2023-10-25, 15:59
-
What are you sizing your bullets to?
- AlanT, 2023-10-26, 14:20
-
Every Ruger .32 I ever had demanded .311-.312” to shoot!
- WB, 2023-10-26, 20:23
-
as far back as I remember we always used a .308
- Gary Reeder, 2023-10-27, 12:21
- I built a few revolvers for John Taffin using a .308 - Gary Reeder, 2023-10-27, 12:25
-
as far back as I remember we always used a .308
- Gary Reeder, 2023-10-27, 12:21
-
32 cratering
- Carl L, 2023-10-26, 19:18
-
New load in a
- Paul, 2023-10-27, 12:07
- 32 cratering... - Carl L, 2023-10-27, 18:29
-
New load in a
- Paul, 2023-10-27, 12:07
-
Every Ruger .32 I ever had demanded .311-.312” to shoot!
- WB, 2023-10-26, 20:23
-
What are you sizing your bullets to?
- AlanT, 2023-10-26, 14:20
-
The bore in the H&R could be a bit tight, causing back
- Gary Reeder, 2023-10-25, 15:59