out we had to cut down 50 AK or 348 to get the 500 Linebaugh. When I developed the 510 GNR it took them a while to get 50,000 rounds cranked out so we had to use 50 AK or 348 to make the 510 brass.
I told people then that the 50 AK brass cost us XX per round. When the 510 GNR came available it cost the same. So there isn't a waste of money but a waste of time.
Some things take longer than others. A hundred years ago I had to cut down 308 brass to get my 44 Auto Mag brass, plus then I had to inside neck ream the cut down case so a 44 bullet would fit in without a bulge. Sometimes it took several hours to get a hundred rounds of good brass.
So it's just what handgunners have to do to be able to enjoy our sport.
-
Starline 500 Linebaugh brass order has been on back order --
- Jeff Spencer, 2024-12-18, 18:44
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
I had 327 Federal Magnum
- AmBraCol, 2024-12-20, 14:26
- Graf’s shows it in stock. (nm) - Shawn D, 2024-12-23, 18:50
-
It's a bit of a waste but I make brass from
- WB, 2024-12-19, 08:52
-
it's not really a waste. When it first came
- Gary Reeder, 2024-12-19, 11:49
-
it's just what handgunners have to do
- Jim Taylor, 2024-12-19, 12:33
-
And we are a bit short of enough 480 Achilles
- Jim Taylor, 2024-12-19, 12:42
-
We must sit sometime and discuss full length
- WB, 2024-12-19, 14:25
- To tell the truth I've never had any interest in that ... - Jim Taylor, 2024-12-19, 15:19
-
We must sit sometime and discuss full length
- WB, 2024-12-19, 14:25
-
And we are a bit short of enough 480 Achilles
- Jim Taylor, 2024-12-19, 12:42
-
it's just what handgunners have to do
- Jim Taylor, 2024-12-19, 12:33
-
it's not really a waste. When it first came
- Gary Reeder, 2024-12-19, 11:49
-
I had 327 Federal Magnum
- AmBraCol, 2024-12-20, 14:26