Reeder Custom Guns - My go to is H110 and of course work up from listed

Darryl T.
My go to is H110 and of course work up from listed
Monday, April 28, 2025, 06:33

Starting loads. I like the Hodgdon website for their powders. I don't care for LilGun in revolvers. Do a little research and you'll find it can cause "flame cutting" on the top strap. Although, it is listed as some of the better velocity loadings.

Looking for a 44M PPP load… - Dave H., 2025-04-27, 17:21
- 44 loads, 8.0 g unique, 240 g keith works in my 44 mag for - jthomson, 2025-04-30, 19:24
  - I’ve used as much as 10.0 gr. in .44 Mag./.45 Ruger loads - WB, 2025-05-01, 11:08
- My go to is H110 and of course work up from listed - Darryl T., 2025-04-28, 06:33
  - Really looking for a working load, not - Dave H., 2025-04-28, 10:07
    - I use 10gr of Longshot with 240gr bullets. I get - drdougrx, 2025-04-29, 04:04
      - I use 9.0 gr of Longshot behind a - Amede, 2025-04-29, 07:42
  - Not to start anything and I think you are probably aware - Jim Taylor, 2025-04-28, 07:09
- I really like 4227 in the magnum and special - WB, 2025-04-27, 18:26
  - Thanks WB - Dave H., 2025-04-28, 04:37
    - Also try Power Pistol and Longshot - Amede, 2025-04-28, 11:00
    - I use shotgun powders also - Jim Taylor, 2025-04-28, 06:23
      - I discovered Green Dot when I tried it . . . - ORG, 2025-04-29, 06:31
        It works well in most all pistol cartridges. - Jim Taylor, 2025-04-29, 07:56