Reeder Custom Guns - Not Gary, but would require an Old Model Single Six...

Huey
Not Gary, but would require an Old Model Single Six...
Thursday, January 24, 2019, 17:13

Due to the wide rim of the 357 Magnum case. Otherwise it would get into the transfer bar channel when opening the loading gate.

My 256 Winchester required a five shot cylinder. I'm sure all the same rules would apply since the same base case is used for both rounds.

If I'm wrong on any of this, Gary can correct me.

I highly recommend this conversion. No finer Trail Gun our there than my own Old Model build.

I have one more Old Model base gun hoarded back. I'm torn between the 321 GNR and the old 38-44 H.D. Special. I'll have to decide or find another base gun and build both.

321 GNR - Frank Simon, 2019-01-24, 16:27
- .321gnr S6 cylinder - Frank Simon, 2019-01-25, 06:16
  - 5 shot (nm) - Gary Reeder, 2019-01-25, 10:37
- I just called Gary earlier and asked him the same thing. - Ray, 2019-01-24, 22:28
- only on an old model Single Six. The new model has - Gary Reeder, 2019-01-24, 17:24
- Not Gary, but would require an Old Model Single Six... - Huey, 2019-01-24, 17:13
  - 321 GNR - Frank Simon, 2019-01-24, 17:25
    - 321 GNR - Frank Simon, 2019-01-24, 18:00
      - here are some velocities, and all with a 13" barrel - Gary Reeder, 2019-01-24, 21:13
      - Havent chrono'd anything yet but - Amede, 2019-01-24, 19:19
        Pic finally - Amede, 2019-01-24, 19:33
        and another - Amede, 2019-01-24, 19:35
    - Honestly, they aren't hard to find at all. I bought two... - Huey, 2019-01-24, 17:34
    - I would recommend the Blackhawk. You have more range of - Gary Reeder, 2019-01-24, 17:29
      - 321 GNR - Frank Simon, 2019-01-24, 17:33
        Like Gary said, the Blackhawk much more forgiving... - Huey, 2019-01-24, 17:37