Reeder Custom Guns

Alcorn
bullets
Sunday, March 24, 2019, 16:27

I have never stuck that many bullets in a barrel. Are they plate bullets with jacket 100% around? If not I would still try a muzzle loading ball extractor. If that does not work, Lock it down real tight in a vice, use a solid steel rod and a shop hammer to drive it out. Be carful, a lick off center can hurt the rifling.

Got One For Ya Waterboy! - Jim Taylor, 2019-03-24, 14:42
- Sometimes you have to go with hat in hand - WB, 2019-03-24, 18:13
  - My choice is a new barrel ... (nm) - Jim Taylor, 2019-03-24, 20:53
    - Not many folks work for free, except me. - WB, 2019-03-25, 09:37
- What fo BP shooters use when they have a misfire? (nm) - Grover Sr, 2019-03-24, 15:52
  - They use Lead projectiles .. - Jim Taylor, 2019-03-24, 16:13
- Could you heat the barrel - Grover Sr, 2019-03-24, 14:47
  - I kinda doubt it ... if there was only 1 bullet maybe .. - Jim Taylor, 2019-03-24, 14:56
    - remove the barrel and press them out or driil them out (nm) - Woody, 2019-03-24, 15:08
      - I have the barrel off the gun .. - Jim Taylor, 2019-03-24, 15:30
        The right choice to me would be just - Sid R, 2019-03-25, 04:51
        I'll never understand just quite how that happens... (nm) - ChrisG, 2019-03-24, 15:52
        bullets - Alcorn, 2019-03-24, 16:27
        Appear to be FMJ's .. not sure if plated type or not. (nm) - Jim Taylor, 2019-03-25, 06:59
        oops - Alley oop, 2019-03-24, 21:03
        That would work .... hard to drill through 4" of bullets - Jim Taylor, 2019-03-25, 06:58
        Like the 303 British barrel with an 8mm Mauser bullet... - Huey, 2019-03-25, 07:37
        Interesting. Would not have thought of that. I like it. (nm) - ChrisG, 2019-03-25, 03:34
        Hope previous owner never gets a 454 Casull... (nm) - Huey, 2019-03-24, 16:37
        I disagree, firm believer in the - Grover Sr, 2019-03-24, 18:01