|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- Favorite method of hunting barring a treestand
- John W,
2018-11-05, 19:27
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- John, in Eastern Washington we don't - Mark Conner, 2018-11-06, 23:32
- I walk the woods. Very slowly staying on the - Blake, 2018-11-06, 14:59
- Ground blinds. Made from natural materials. - Brant, 2018-11-05, 19:37
- John you have my # call me pete (nm) - BlackPete, 2018-11-05, 19:33
- I never hunt in a treestand. Too limited. I always
- Gary Reeder,
2018-11-05, 19:32
- As years come upon us
- BlackPete,
2018-11-05, 19:37
- if anything, I think the properly set up ground blind
- Gary Reeder,
2018-11-05, 19:49
- In the south, deer walk through the brush looking up. Time - Lymey, 2018-11-05, 21:16
- Thank you Gary. (nm) - BlackPete, 2018-11-05, 19:54
- if anything, I think the properly set up ground blind
- Gary Reeder,
2018-11-05, 19:49
- As years come upon us
- BlackPete,
2018-11-05, 19:37
- some new grip material came in today. Future
- Gary Reeder,
2018-11-05, 17:31
- Gary are they priced yet! (nm)
- BlackPete,
2018-11-05, 18:43
- I like to have one of the bottom two.
- BlackPete,
2018-11-05, 18:45
- the long ones will make 2 sets of grips. I will - Gary Reeder, 2018-11-05, 19:19
- The bottom one reminds me of a - John W, 2018-11-05, 19:19
- I like to have one of the bottom two.
- BlackPete,
2018-11-05, 18:45
- I miss the days of buying Ukrainian Wood by number... (nm)
- Huey,
2018-11-05, 17:51
- Me too. I like #1 and #2 for a build. (nm) - Woody, 2018-11-05, 18:04
- Gary are they priced yet! (nm)
- BlackPete,
2018-11-05, 18:43
- another estate sale today. Most of the stuff was standard
- Gary Reeder,
2018-11-05, 15:44
- If it's still available, I would like to have it. Thanks (nm)
- Winn,
2018-11-05, 18:22
- you got it Winn, thanks (nm)
- Gary Reeder,
2018-11-05, 19:17
- Winn, good buy.
- BlackPete,
2018-11-05, 19:45
- They are actually pretty nice, and accurate shooters (nm) - Woody, 2018-11-05, 20:20
- Winn, good buy.
- BlackPete,
2018-11-05, 19:45
- you got it Winn, thanks (nm)
- Gary Reeder,
2018-11-05, 19:17
- If it's still available, I would like to have it. Thanks (nm)
- Winn,
2018-11-05, 18:22
- Colleen, email sent. (nm)
- Grover Sr,
2018-11-05, 15:29
- at the office .. working hard
- Jim Taylor,
2018-11-05, 15:21
- It never runs dry! (nm) - Kelye, 2018-11-05, 15:29
- Africa
- Bob in CA,
2018-11-05, 14:47
- Another thing to keep in mind is - Df, 2018-11-06, 06:55
- I believe folks should plan on
- Df,
2018-11-05, 18:43
- Listen to Doug, every one of us would tell
- Amede,
2018-11-05, 20:00
- one other thing. Your PH will point out record book - Gary Reeder, 2018-11-05, 20:08
- Listen to Doug, every one of us would tell
- Amede,
2018-11-05, 20:00
- Bob, that is not a set price. That is just what Alcorn spent
- Gary Reeder,
2018-11-05, 15:30
- Sorry to mislead with my post
- Bob in CA,
2018-11-05, 17:23
- Here is what I paid for the 2017 hunt taxidermy
- IC,
2018-11-05, 18:05
- so Irv got a lifetime of memories for less than $3000. (nm) - Gary Reeder, 2018-11-05, 19:25
- the taxidermy is a totally separate company. It - Gary Reeder, 2018-11-05, 17:34
- Here is what I paid for the 2017 hunt taxidermy
- IC,
2018-11-05, 18:05
- African Cost
- Alcorn,
2018-11-05, 15:40
- Lots of mount options too... (nm) - Huey, 2018-11-05, 15:43
- Sorry to mislead with my post
- Bob in CA,
2018-11-05, 17:23
- Following Jim's post, I've been working with my 44-40s...
- Huey,
2018-11-05, 12:37
- Nice New Frontier! (nm)
- ChrisG,
2018-11-05, 14:36
- Thank you Chris. My Colt knowledge is near nothing... - Huey, 2018-11-05, 15:01
- I loved my old 44-40 "El Tigre" levergun.
- Jim Taylor,
2018-11-05, 14:07
- I like my Reeder revolving carbine in 44-40 and it's - Woody, 2018-11-05, 18:02
- I've been blessed with good dimensions my two guns... - Huey, 2018-11-05, 14:38
- Very nice Huey, will be good hog and deer medicine. (nm) - Kyle, 2018-11-05, 13:30
- Nice New Frontier! (nm)
- ChrisG,
2018-11-05, 14:36
- Check for Allison will be on way today!
- Larryh,
2018-11-05, 12:08
- Allison - Charlie Herf, 2018-11-05, 15:39
- Mid-frame Base Pins
- Kelye @ Belt Mtn,
2018-11-05, 10:41
- thank you Kelye (nm) - Gary Reeder, 2018-11-05, 10:52
- Tough Game
- Jim Taylor,
2018-11-05, 07:22
- I agree. The game is so tuff these days, I have been
- Gary Reeder,
2018-11-05, 12:58
- Some morons raised these days. - Da Duke, 2018-11-05, 14:16
- Creedmoor
- MB,
2018-11-05, 10:39
- Hornady - ., 2018-11-05, 11:46
- I have to agree with Gary. The 6.5 Creedmore is the most
- Jerome,
2018-11-05, 11:05
- But remember that is a problem with the writers... - Huey, 2018-11-05, 12:00
- try telling that to the young guys that have it. They - Gary Reeder, 2018-11-05, 10:55
- SEVERAL YEARS AGO I GAVE MY GRANDSON AN EARLY RUGER 77
- JT,
2018-11-05, 07:32
- I've often wondered how our ancestors nearly wiped out..
- Huey,
2018-11-05, 08:18
- Not to mention the mountain men - Jim Taylor, 2018-11-05, 08:28
- I've often wondered how our ancestors nearly wiped out..
- Huey,
2018-11-05, 08:18
- Texas critters sure are tough. (nm)
- IC,
2018-11-05, 07:26
- Texas critters
- Alcorn,
2018-11-05, 07:29
- Jim Always a pleasure to read your stories
- BlackPete,
2018-11-05, 08:15
- Nothing wrong with those two ... - Jim Taylor, 2018-11-05, 08:35
- I find myself taking my Win 94 30-30 more
- Derek,
2018-11-05, 08:28
- Shot my first deer with a rifle (Marlin 336) chambered for - JPL, 2018-11-05, 12:40
- Jim Always a pleasure to read your stories
- BlackPete,
2018-11-05, 08:15
- Texas critters
- Alcorn,
2018-11-05, 07:29
- I agree. The game is so tuff these days, I have been
- Gary Reeder,
2018-11-05, 12:58
- For JT
- jthomson,
2018-11-05, 06:21
- Good one Jon. (nm) - SPB, 2018-11-05, 08:10
- YEP (nm) - JT, 2018-11-05, 07:33
- Great Rock n roll
- Alcorn,
2018-11-05, 04:54
- yeah, all the ladies like that one (nm) - Gary Reeder, 2018-11-05, 10:22
- Wives & Hunting knives
- Frank Simon,
2018-11-04, 17:16
- I have been collecting knives for years - Larry Fry, 2018-11-05, 11:47
- One of Gary’s Predator knives would be hard to beat (nm) - Blake, 2018-11-04, 18:14
- Gary can set you up. I probably - BlackPete, 2018-11-04, 17:26
- .357, what for?
- Tom,
2018-11-04, 17:11
- I also have a 586 with a six inch
- Larry Fry,
2018-11-05, 11:33
- I agree with bullet placement - Da Duke, 2018-11-05, 14:30
- TWO PART ARTICLE - JT, 2018-11-04, 22:09
- I have a 19 - Grover Sr, 2018-11-04, 19:55
- Well like you said person defends from - Blake, 2018-11-04, 17:26
- They will kill deer
- Randy Barnett,
2018-11-04, 17:20
- it all comes down to 2 words, bullet placement
- Gary Reeder,
2018-11-04, 18:50
- THE MOST IMPORTANT IS - JT, 2018-11-05, 12:22
- Dan Wesson (nm)
- Randy Barnett,
2018-11-04, 19:10
- I wondered about that. The barrel looked a bit slab sided - Gary Reeder, 2018-11-04, 20:20
- Nice
- james,
2018-11-04, 18:49
- Agree with Randy
- Alcorn,
2018-11-04, 18:52
- some deer do - Gary Reeder, 2018-11-04, 20:19
- Agree with Randy
- Alcorn,
2018-11-04, 18:52
- it all comes down to 2 words, bullet placement
- Gary Reeder,
2018-11-04, 18:50
- I also have a 586 with a six inch
- Larry Fry,
2018-11-05, 11:33
- 50-70 vs. 44 Magnum...
- Huey,
2018-11-04, 15:08
- Huey can you put a 45-70 in with the
- BlackPete,
2018-11-04, 15:31
- Eventually... (nm)
- Huey,
2018-11-04, 15:33
- No, just for show in size? Pete (nm) - BlackPete, 2018-11-04, 16:24
- Eventually... (nm)
- Huey,
2018-11-04, 15:33
- Huey can you put a 45-70 in with the
- BlackPete,
2018-11-04, 15:31
- just a note here on the time change. Here in AZ we don't
- Gary Reeder,
2018-11-04, 13:27
- AZ. cows do not know time difference (nm)
- Charlie Herf,
2018-11-04, 13:58
- Did you just call Gary a cow? (nm)
- .,
2018-11-04, 17:24
- I have been called worse....by my Mother (nm) - Gary Reeder, 2018-11-04, 18:51
- Did you just call Gary a cow? (nm)
- .,
2018-11-04, 17:24
- AZ. cows do not know time difference (nm)
- Charlie Herf,
2018-11-04, 13:58
- 480 ruger, marlin 1894
- Michael,
2018-11-04, 11:40
- no, at least not without completely revamping the whole
- Gary Reeder,
2018-11-04, 12:27
- 480 ruger, 1894
- Michael,
2018-11-04, 13:22
- it doesn't have anything to do with deciding to do it. - Gary Reeder, 2018-11-04, 13:38
- 1894 Marlin
- Alcorn,
2018-11-04, 13:26
- I have one in 429 GNR and it's a thumper... (nm)
- Huey,
2018-11-04, 13:32
- that is my favorite lever gun. I am not a rifle guy - Gary Reeder, 2018-11-04, 13:41
- I have one in 429 GNR and it's a thumper... (nm)
- Huey,
2018-11-04, 13:32
- 480 ruger, 1894
- Michael,
2018-11-04, 13:22
- no, at least not without completely revamping the whole
- Gary Reeder,
2018-11-04, 12:27
- Anybody load for the 7.7 Jap? Found dies while...
- Huey,
2018-11-04, 08:22
- O well. 2 minutes! (nm)
- BlackPete,
2018-11-04, 11:07
- Sorry Pete :( - Greg M., 2018-11-04, 11:14
- Hi Huey, - BlackPete, 2018-11-04, 11:05
- Me?
- Greg M.,
2018-11-04, 11:02
- Wait, I am an idiot. Please send them to Pete
- Greg M.,
2018-11-04, 11:23
- Thanks Greg. I owe you one. Pete (nm) - BlackPete, 2018-11-04, 16:12
- A sporterized one was my first deer rifle, and
- Woody,
2018-11-04, 12:04
- 6.5 Jap
- Alcorn,
2018-11-04, 13:10
- Greg posted first, but then remembered he had s set... - Huey, 2018-11-04, 15:13
- 6.5 Jap
- Alcorn,
2018-11-04, 13:10
- Wait, I am an idiot. Please send them to Pete
- Greg M.,
2018-11-04, 11:23
- O well. 2 minutes! (nm)
- BlackPete,
2018-11-04, 11:07
- Bushcraft training question...
- WB,
2018-11-04, 07:08
- I was cycled through the Navy SERE school in Rangeley, ME
- JPL,
2018-11-04, 16:53
- Very cool, good info for daddy's little girl. (nm) - WB, 2018-11-04, 20:29
- Scotty, check out the MCI 0381C - Land Navigation - JPL, 2018-11-04, 17:10
- Get FM3-25.26 It's the Army manual
- IC,
2018-11-04, 08:24
- PDF LINK.
- SPB,
2018-11-04, 09:01
- Navy/Marine
- SPB,
2018-11-04, 09:25
- Thanks guys! (nm) - WB, 2018-11-04, 13:01
- Navy/Marine
- SPB,
2018-11-04, 09:25
- PDF LINK.
- SPB,
2018-11-04, 09:01
- I was cycled through the Navy SERE school in Rangeley, ME
- JPL,
2018-11-04, 16:53
- for those thinking of going to Africa with us
- Gary Reeder,
2018-11-03, 19:56
- and here is the good part. None of those hunters had ever
- Gary Reeder,
2018-11-03, 19:59
- Don’t Pass it Up
- Bill Firman,
2018-11-04, 11:42
- Bill is right. His first trip to Africa was with me and he
- Gary Reeder,
2018-11-04, 12:29
- Africa
- Alcorn,
2018-11-04, 13:22
- I'll chime in too. Best trip that can be imagined..
- Huey,
2018-11-04, 13:34
- Gary, if you remember one of our conversations, I have chron
- Lymey,
2018-11-04, 18:43
- boy, that is a tuff one. In 14 trips to Africa - Gary Reeder, 2018-11-04, 19:00
- Gary, if you remember one of our conversations, I have chron
- Lymey,
2018-11-04, 18:43
- I'll chime in too. Best trip that can be imagined..
- Huey,
2018-11-04, 13:34
- Africa
- Alcorn,
2018-11-04, 13:22
- Bill is right. His first trip to Africa was with me and he
- Gary Reeder,
2018-11-04, 12:29
- Don’t Pass it Up
- Bill Firman,
2018-11-04, 11:42
- and here is the good part. None of those hunters had ever
- Gary Reeder,
2018-11-03, 19:59
- Pigs
- Ray Shepard,
2018-11-03, 18:52
- Great job Ray, Well done. (nm) - Marco, 2018-11-04, 17:36
- That great stuff. Congratulations (nm) - Blake, 2018-11-04, 16:56
- Great job! (nm) - Derek, 2018-11-04, 12:53
- Very Nice! (nm) - ChrisG, 2018-11-03, 20:55
- Well done! (nm)
- Drdougrx,
2018-11-03, 19:22
- Nice - james, 2018-11-04, 12:53
- Guys that have shoulder mounts
- Jk,
2018-11-03, 15:47
- a lot of prayer. That sheetrock won't hold up a big mount
- Gary Reeder,
2018-11-03, 16:07
- LISTEN TO GARY!! (nm)
- JT,
2018-11-03, 17:25
- yes
- james,
2018-11-04, 12:58
- Hanging mount - Winn Turner, 2018-11-04, 18:09
- yes
- james,
2018-11-04, 12:58
- LISTEN TO GARY!! (nm)
- JT,
2018-11-03, 17:25
- a lot of prayer. That sheetrock won't hold up a big mount
- Gary Reeder,
2018-11-03, 16:07
- Cast Bullet Reloading Data
- Robt,
2018-11-03, 15:27
- the Lyman book is the best for that. They don't
- Gary Reeder,
2018-11-03, 15:31
- The Hodgdon annual magazine manual
- WB,
2018-11-03, 16:17
- actually I didn't mean the Lyman Cast Bullet
- Gary Reeder,
2018-11-03, 18:10
- Have to agree on the 50th Edition...
- Huey,
2018-11-03, 18:28
- Thanks to all for your replies.
- Robt,
2018-11-03, 19:22
- The old powders still work great.
- Jim Taylor,
2018-11-04, 05:31
- I'm mainly like that too. I have seen a couple
- WB,
2018-11-04, 06:44
- I grew up with a handgun in my hand, and from '72 or '73 on - Gary Reeder, 2018-11-04, 11:04
- I have nothing against new things or experimenting
- Jim Taylor,
2018-11-04, 06:45
- At your level, you have it going on. - WB, 2018-11-04, 07:39
- I'm mainly like that too. I have seen a couple
- WB,
2018-11-04, 06:44
- The old standards still work fine. (nm)
- IC,
2018-11-03, 19:25
- I still use more Unique and 2400 than any pistol powders...
- Huey,
2018-11-04, 06:11
- Huey .. me too ..and Bullseye ..
- Jim Taylor,
2018-11-04, 06:44
- Cast bullets
- Alcorn,
2018-11-04, 13:32
- you want (nm) - Alcorn, 2018-11-04, 13:33
- Cast bullets
- Alcorn,
2018-11-04, 13:32
- Huey .. me too ..and Bullseye ..
- Jim Taylor,
2018-11-04, 06:44
- I still use more Unique and 2400 than any pistol powders...
- Huey,
2018-11-04, 06:11
- The old powders still work great.
- Jim Taylor,
2018-11-04, 05:31
- Thanks to all for your replies.
- Robt,
2018-11-03, 19:22
- Have to agree on the 50th Edition...
- Huey,
2018-11-03, 18:28
- actually I didn't mean the Lyman Cast Bullet
- Gary Reeder,
2018-11-03, 18:10
- The Hodgdon annual magazine manual
- WB,
2018-11-03, 16:17
- the Lyman book is the best for that. They don't
- Gary Reeder,
2018-11-03, 15:31
- Ode to Uncle Ed - thanks Gary, guys...
- WB,
2018-11-03, 15:23
- Perfect (nm) - Blake, 2018-11-03, 19:04
- That's a heirloom no doubt! Thanks for sharing. (nm) - JPL, 2018-11-03, 18:34
- I love everything about it! (nm) - Drdougrx, 2018-11-03, 17:58
- Great words, pretty gun, nice job on the grips (nm) - Howard, 2018-11-03, 17:24
- Custom Model 28 - stonecold, 2018-11-03, 16:52
- Very Nice!! (nm) - Derek, 2018-11-03, 16:28
- Very nice Scotty (nm) - ChrisG, 2018-11-03, 16:07
- Beautiful ... in many ways. (nm) - Jim Taylor, 2018-11-03, 15:36
- Just read "Christmas Eve 1896" Good one. (nm)
- Derek,
2018-11-03, 15:00