Reeder Custom Guns - actually most of the 405 based cartridges

Gary Reeder
actually most of the 405 based cartridges
Monday, December 30, 2019, 10:12

like the 338 GNR, 350 GNR, 378 GNR and one or two others were developed in the original Contender (G-1). The loads in the red loading manual are for the encore but just drop the loads by 10% and you have the contender load.Like any cartridge start low and work up. But don't go too low or you will get misfires. Just drop 3 or 4 grains and start there.

338 GNR - Dave Flanagan, 2019-12-29, 17:52
- If you're talking forearm, G1 & G2 are the same.. (nm) - Huey, 2019-12-29, 17:54
  - 338 GNR - Dave Flanagan, 2019-12-29, 18:28
    - G2 is mechanically different little more simple - WB, 2019-12-29, 18:42
    - I'm a bit confused. Are you asking about Grip or Frame?... - Huey, 2019-12-29, 18:39
      - 338 GNR - Dave Flanagan, 2019-12-29, 18:51
        That big case has more capacity than you really need - WB, 2019-12-29, 19:20
        actually most of the 405 based cartridges - Gary Reeder, 2019-12-30, 10:12
        “Frame from under the locking lugs” - auto correct FU (nm) - WB, 2019-12-29, 19:31
        Ok, onboard now. I'm in agreement with WB... - Huey, 2019-12-29, 18:54