Reeder Custom Guns - Also tends to be real sharp, might be catching a burr.

Asa
Also tends to be real sharp, might be catching a burr.
Sunday, August 23, 2020, 09:28

- No text -

Ruger BH cylinder stop pin - JB, 2020-08-23, 08:13
- JB is it just me but when I enlarge - Grover Sr, 2020-08-24, 09:23
  - Hadn't noticed that. I'll report back - JB, 2020-08-24, 23:52
- take a small screwdriver and ream out the hole lightly - gary reeder, 2020-08-23, 16:50
  - Screwdriver helped some, then remembered - JB, 2020-08-23, 19:53
- No the OM's had different internals (nm) - Asa, 2020-08-23, 14:03
- Also tends to be real sharp, might be catching a burr. (nm) - Asa, 2020-08-23, 09:28
- If it fit before, the pin is probably just a bit... - Huey, 2020-08-23, 08:24
  - upside down is no go - JB, 2020-08-23, 09:43

powered by my little forum