Reeder Custom Guns - Screwdriver helped some, then remembered

JB
Screwdriver helped some, then remembered
Sunday, August 23, 2020, 19:53

That I have a cordless drill. That did the trick. Action binds up a little here and there, though. I'll tear into it next weekend and see what I come up with.

Ruger BH cylinder stop pin - JB, 2020-08-23, 08:13
- JB is it just me but when I enlarge - Grover Sr, 2020-08-24, 09:23
  - Hadn't noticed that. I'll report back - JB, 2020-08-24, 23:52
- take a small screwdriver and ream out the hole lightly - gary reeder, 2020-08-23, 16:50
  - Screwdriver helped some, then remembered - JB, 2020-08-23, 19:53
- No the OM's had different internals (nm) - Asa, 2020-08-23, 14:03
- Also tends to be real sharp, might be catching a burr. (nm) - Asa, 2020-08-23, 09:28
- If it fit before, the pin is probably just a bit... - Huey, 2020-08-23, 08:24
  - upside down is no go - JB, 2020-08-23, 09:43