Reeder Custom Guns - normally on a hot load the cylinder expands and slams into

Gary Reeder
normally on a hot load the cylinder expands and slams into
Monday, December 14, 2020, 10:29

the top strap and the bottom of the window frame. This usually leaves a horizontal line all the way across the cylinder. The lines on that cylinder are in one spot so it looks to me like during the expanding it wasn't as hot as some and the only marks it made were where it hit the screw hole in the front bottom of the cylinder window where the screw is. The ammo wasn't an extremely hot load as it didn't leave the horizontal line all the way across the cylinder but was hot enough to expand into the screw hole.

Ultimate Black Widow, up for another look... - Mark Shick, 2020-12-13, 14:44
- that is one of our early guns, maybe 17 or 18 years old. The - gary reeder, 2020-12-13, 18:43
  - The bar shaped marks he has circled at the front of the - Woody, 2020-12-13, 22:38
    - normally on a hot load the cylinder expands and slams into - Gary Reeder, 2020-12-14, 10:29
    - Woody is correct, - Mark Shick, 2020-12-14, 05:27
  - Cylinder ring - Rex, 2020-12-13, 20:46
    - it might but those high polished rings are mag Na Port's - Gary Reeder, 2020-12-14, 10:19
      - rings - Rex, 2020-12-14, 11:35