Reeder Custom Guns - when we get them in from Ruger they are rough with no sharp

Gary Reeder
when we get them in from Ruger they are rough with no sharp
Tuesday, March 02, 2021, 12:37

edges or rounded edges, pretty much a square flat top. Each gun is different. Some need a rounded top edge so the gate will roll over it while some need a slanted edge like Jims to open smoothly. I have seen factory new guns come in so hard it takes 2 thumbs to open the gate.

Some self Smithing, understandingn? - WB, 2021-03-02, 08:27
- I polish the round part of the loading gate the spring - Asa, 2021-03-02, 18:12
- Angle of the tip of the spring - Jim Taylor, 2021-03-02, 08:47
  - Ah, just the opposit what I was thinking. Thanks! (nm) - WB, 2021-03-02, 09:31
    - when we get them in from Ruger they are rough with no sharp - Gary Reeder, 2021-03-02, 12:37
      - I'm gonna kiss it with a stone and see if it helps a little, - WB, 2021-03-02, 13:41
        SOMETIMES I THINK YOU HAVE BEEN KISSIN' - JT, 2021-03-02, 19:13
        LOL, there's an idea. Jim is full of knowledge, takes hints (nm) - WB, 2021-03-02, 19:42