Reeder Custom Guns - I'm gonna kiss it with a stone and see if it helps a little,

WB
I'm gonna kiss it with a stone and see if it helps a little,
Tuesday, March 02, 2021, 13:41

all I really need. I'm fine tuning. I can see the geometry Jim is pointing out. An angle would help push the spring down without binding. Mine has just a touch, I think a little more might help.

[image]

Some self Smithing, understandingn? - WB, 2021-03-02, 08:27
- I polish the round part of the loading gate the spring - Asa, 2021-03-02, 18:12
- Angle of the tip of the spring - Jim Taylor, 2021-03-02, 08:47
  - Ah, just the opposit what I was thinking. Thanks! (nm) - WB, 2021-03-02, 09:31
    - when we get them in from Ruger they are rough with no sharp - Gary Reeder, 2021-03-02, 12:37
      - I'm gonna kiss it with a stone and see if it helps a little, - WB, 2021-03-02, 13:41
        SOMETIMES I THINK YOU HAVE BEEN KISSIN' - JT, 2021-03-02, 19:13
        LOL, there's an idea. Jim is full of knowledge, takes hints (nm) - WB, 2021-03-02, 19:42