Reeder Custom Guns - I started out shooting 400 gr. bullets

WB
I started out shooting 400 gr. bullets
Thursday, August 19, 2021, 20:40

and kicked myself silly, fought a flinch and all. Then I figured out that a 325 gr. bullet recoiled lots less, even at higher velocity and would shoot through even a big piggy.

So that is what I switched to before transitioning to my .510 GNR kit. I shoot 350-370 gr. bullets from it mostly. 4227 loads are accurate and also a notch under hot H110 beasties.

475 cast bullets - Derek, 2021-08-19, 17:48
- I had a revolver and used .476". (nm) - WB, 2021-08-19, 18:04
  - Thanks WB! I got him to size them to .476 (nm) - Derek, 2021-08-19, 19:06
    - I started out shooting 400 gr. bullets - WB, 2021-08-19, 20:40
      - I stay at .475 and it works fine. We shoot a couple - gary reeder, 2021-08-19, 22:06
        Your Encore should not be picky, but over .476 would - WB, 2021-08-20, 06:30
        Case in point! The spell check feature changed my text - WB, 2021-08-20, 06:34
        I would get a .475 sizer if I could find one (nm) - Derek, 2021-08-20, 07:04
        You will be fine at .476 - Mark Wilson, 2021-08-20, 07:39
        There are some folks that make custom sizers but - WB, 2021-08-20, 07:58