Reeder Custom Guns - There are some folks that make custom sizers but

WB
There are some folks that make custom sizers but
Friday, August 20, 2021, 07:58

you can usually manage. In .510 GNR loading I NEED a .510" bullet for proper fit. Lyman only makes a standard .512" die for the 450 machine. So I lubesize to .512", from a .515" drop, and then push through a LEE .510" sizer. It works for me. But you see how you can manipulate available methods. My cylinder throats are .511" and you can't fit a .512" bullet in them.

475 cast bullets - Derek, 2021-08-19, 17:48
- I had a revolver and used .476". (nm) - WB, 2021-08-19, 18:04
  - Thanks WB! I got him to size them to .476 (nm) - Derek, 2021-08-19, 19:06
    - I started out shooting 400 gr. bullets - WB, 2021-08-19, 20:40
      - I stay at .475 and it works fine. We shoot a couple - gary reeder, 2021-08-19, 22:06
        Your Encore should not be picky, but over .476 would - WB, 2021-08-20, 06:30
        Case in point! The spell check feature changed my text - WB, 2021-08-20, 06:34
        I would get a .475 sizer if I could find one (nm) - Derek, 2021-08-20, 07:04
        You will be fine at .476 - Mark Wilson, 2021-08-20, 07:39
        There are some folks that make custom sizers but - WB, 2021-08-20, 07:58