WB
Your Encore should not be picky, but over .476 would
Friday, August 20, 2021, 06:30

Worry me a little. It adds diameter to the ctg. And could get tight chambering. Like Gary said if you are going to be off any it’s better to be on the smaller end.

Revolvers really need to be checked before a bulk order commitment. With Gary shooting his from 20 different guns he made the perfect choice at .475”. The chamber throats might be .476 and not accept a .477”. But that would shoot a .475 or .476 fine. I know guys that just have to get it 100% matched and that’s great. In large it’s lost on me, I can’t shoot that good. But cutting edge perfect is nice when it can effectively be achieved.

Powder coating bullets bumps them up around 0.003” too so you could can take an undersize (say .355 or .308) and bump it up for other applications. Shooting 9mm from .357 or .308 bullets from oversized military notes. That’s fun and a handy trick.