Reeder Custom Guns - I never felt the need to anneal the brass for the 416 GNR

Gary Reeder
I never felt the need to anneal the brass for the 416 GNR
Wednesday, May 23, 2018, 19:13

Starting with the 50 AK brass I went down to 458 and then the 416. With the 348 brass I didn't anneal either. I just filled it up the shoulder with a pistol powder (AA#7, Blue Dot, Unique etc) tamped down the powder with 1/4 of the square of toilet tissue rolled up into a ball and shot it in the 416 GNR chamber. It always worked fine.

416 GNR forming. I’m annealing the brass now. - O’ Gary, 2018-05-23, 18:37
- I never felt the need to anneal the brass for the 416 GNR - Gary Reeder, 2018-05-23, 19:13
  - I had the .476 and .440 GNR dies so - WB, 2018-05-23, 19:29
    - Thanks gents. I annealed cause I thought - O’ Gary, 2018-05-23, 20:15
      - Sounds good to me! (nm) - WB, 2018-05-23, 21:35