Reeder Custom Guns - Thanks gents. I annealed cause I thought

O’ Gary
Thanks gents. I annealed cause I thought
Wednesday, May 23, 2018, 20:15

it would be easier to turn the corner based on a short neck. It worked! I did 5 pieces in a single slow pass bumping the arm/ram as I approached the shoulder.

I did adjust the expander ball to support the neck as it entered the neck forming area to avoid crumpled necks. I’ll readjust the expander ball for decapping once all brass is formed.

416 GNR forming. I’m annealing the brass now. - O’ Gary, 2018-05-23, 18:37
- I never felt the need to anneal the brass for the 416 GNR - Gary Reeder, 2018-05-23, 19:13
  - I had the .476 and .440 GNR dies so - WB, 2018-05-23, 19:29
    - Thanks gents. I annealed cause I thought - O’ Gary, 2018-05-23, 20:15
      - Sounds good to me! (nm) - WB, 2018-05-23, 21:35