Reeder Custom Guns - I've done soem wild things, but never actually

WB
I've done soem wild things, but never actually
Tuesday, February 19, 2019, 18:30

"sprung" an action. I hear it can be done in only a few rounds with the right hot loads. So many variables with bullets and powder peak pressure rates. Like when one load has brass so hot you can't touch it for 10 minutes and another is cold right from the breach. What's up with that?!! I remember one semi auto 5.56 load I watched the ejected brass land, then turn a blue hue, as it cooled. Other loads didn't do that.

You know what you are doing. Have fun.

45-70 handload/pressure question - Rsim, 2019-02-19, 12:29
- I NEVER load with hear say advice.. - Huey, 2019-02-19, 13:00
  - To be easy on the frame I'd stick to less pressure loads - WB, 2019-02-19, 15:15
    - Bolt thrust was a killer with hot Marlin 1895 - Rsim, 2019-02-19, 15:51
      - I've done soem wild things, but never actually - WB, 2019-02-19, 18:30
      - Both Hornady and Sierra have loads - Amede, 2019-02-19, 16:21
        I use the Revolution thumbhole stock to spread out - Rsim, 2019-02-19, 16:39
  - Trust, but verify. (nm) - ChrisG, 2019-02-19, 15:09
- Sounds like a good for the encore. Not sure about the G2... (nm) - Kyle, 2019-02-19, 12:57
  - I wouldn't worry too much about the new G-2 or Encore - Gary Reeder, 2019-02-19, 22:00
    - Thanks, Gary (nm) - Rsim, 2019-02-20, 05:41
  - 45-70 pressure - Alcorn, 2019-02-19, 17:41
    - Those were my thoughts given long experience with the 45-70. - Rsim, 2019-02-19, 20:21