I once had to make a guide and drill out most of a jacketed bullet in the bore with an extended bit. Then I was able to pound it out with a solid brass rod. It was a very long 6.5 with a tough Accubond jacket. It was a chore!
-
Squib load!!!!!!!!!!!!!!!!
- John W, 2019-03-24, 14:17
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
Classic too cool primer for the powder.
- WB, 2019-03-24, 14:38
- I agree with WB (nm) - Sid R, 2019-03-24, 20:35
-
Primers
- Alcorn, 2019-03-24, 16:35
-
I kinda have to disagree with Alcorn. I have never
- Gary Reeder, 2019-03-24, 17:17
-
Primers
- Alcorn, 2019-03-24, 18:50
-
CCI primers, in my experience, tend to be a harder primer.
- Gary Reeder, 2019-03-24, 21:09
-
Primers
- Alcorn, 2019-03-25, 05:51
- I've never used anything but Winchester, - Rsim, 2019-03-25, 11:04
-
Primers
- Alcorn, 2019-03-25, 05:51
-
CCI primers, in my experience, tend to be a harder primer.
- Gary Reeder, 2019-03-24, 21:09
-
Primers
- Alcorn, 2019-03-24, 18:50
-
I kinda have to disagree with Alcorn. I have never
- Gary Reeder, 2019-03-24, 17:17
-
Classic too cool primer for the powder.
- WB, 2019-03-24, 14:38