I think J.D. was right to tell Alcorn to get away from CCI primers but I also think any other primer, magnum type, would have done as well as Federal. Any gun that has had a light action job, lighter than normal hammer fall, will have a misfire from time to time with CCI primers. We use CCI primers on our proof loads figuring if our action job will set off a CCI then it will set off any primer. I never use CCI primers in my hunting loads just in case.
I will have to correct myself on one comment. I said I never use Federal primers. Actually I do. I like the Federal small pistol Match that I use in my Raptor cartridges.
-
Squib load!!!!!!!!!!!!!!!!
- John W, 2019-03-24, 14:17
-
Classic too cool primer for the powder.
- WB, 2019-03-24, 14:38
- I agree with WB (nm) - Sid R, 2019-03-24, 20:35
-
Primers
- Alcorn, 2019-03-24, 16:35
-
I kinda have to disagree with Alcorn. I have never
- Gary Reeder, 2019-03-24, 17:17
-
Primers
- Alcorn, 2019-03-24, 18:50
-
CCI primers, in my experience, tend to be a harder primer.
- Gary Reeder, 2019-03-24, 21:09
-
Primers
- Alcorn, 2019-03-25, 05:51
- I've never used anything but Winchester, - Rsim, 2019-03-25, 11:04
-
Primers
- Alcorn, 2019-03-25, 05:51
-
CCI primers, in my experience, tend to be a harder primer.
- Gary Reeder, 2019-03-24, 21:09
-
Primers
- Alcorn, 2019-03-24, 18:50
-
I kinda have to disagree with Alcorn. I have never
- Gary Reeder, 2019-03-24, 17:17
-
Classic too cool primer for the powder.
- WB, 2019-03-24, 14:38