Reeder Custom Guns - A cue-tip works well. Adjust the .223's only enough

WB
A cue-tip works well. Adjust the .223's only enough
Friday, January 03, 2020, 00:20

to get the job done. Forget the neck sizing, you want the opposite anyway. .223 are shorter than .204 and messing around there you'll crush one. New brass should work without any other goofing around.

204 to 240 - Josh, 2020-01-02, 23:55
- I make 257 Raptors in one step with no problems - Blake, 2020-01-03, 07:28
  - ...with fresh new brass, right? - WB, 2020-01-03, 07:52
    - borrowed - Paul, 2020-01-03, 13:09
    - Yes new brass! (nm) - Blake, 2020-01-03, 10:26
- When I was making 6.5 Raptor,,, - Tim Pence, 2020-01-03, 07:14
  - I goofed with annealing, but it causes more problems - WB, 2020-01-03, 07:34
- Idea - Josh, 2020-01-03, 01:10
- They should work, a little lube inside the case neck. - WB, 2020-01-03, 00:17
  - A cue-tip works well. Adjust the .223's only enough - WB, 2020-01-03, 00:20
  - I don’t have any - Josh, 2020-01-03, 00:19
    - NO, a collet sizer will not at all. - WB, 2020-01-03, 00:27
      - Thanks (nm) - Josh, 2020-01-03, 01:03